Abstract:The olivine LiFePO4 with various morphologies and different growth lattice planes was prepared by a controllable hydrothermal method with changing precursor concentration and using phytic acid as phosphorus source. The microstructure, crystal orientation and electrochemical performance of the prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM) and charge–discharge tests. The results show that the morphologies of all samples change from spindle-like to hierarchical plate-like and then to long plate-like shape, and the main exposed facets transform from (100) to (001). This indicates that the precursor concentration and phytic acid play important roles in exposing facets and controlling the morphology of LiFePO4. In order to illustrate these phenomena, a reasonable assembly process is provided and the formation is explained. Li ion diffusion coefficient along [100] and [001] directions was calculated by using electrochemical impedance spectroscopy (EIS). The results show that the diffusion coefficient of (100) facet is higher than that of (001) facet, indicating a good electrochemical performance for (100) facet. In addition, the capacity test is carried out, which also confirms the above results. With the precursor concentration of 0.5[Formula: see text]M, the obtained LiFePO4 with self-assembled hierarchical structure, smaller size and (100) facet shows the best electrochemical performance: 162.1[Formula: see text]mAh/g at 0.1[Formula: see text]C and 112.4[Formula: see text]mAh/g at 10[Formula: see text]C. Using phytic acid as phosphorus source and controlling precursor concentration to prepare high performance LiFePO4 open up a new prospect for the production of cathode materials for lithium ion batteries.

Synthesis and electrochemical properties of olive-shape porous LiFePO4 cathode materials

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

Improvement of Electrochemical Performance of LiFePO4 Cathode Materials for Lithium-Ion Battery

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Shape Controlled Hydrothermal Synthesis and Characterization of LiFePO4 for Lithium Ion Batteries

Synthesis and electrochemical properties of LiFePO4/C composite cathode materials

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

LiFePO4 Cathode Materials with Enhanced Performance Prepared by a Novel Solid-State Method

Fabrication and electrochemical properties of LiFePO4/C cathode materials

Preparation and characterization of Ti4+-doped LiFePO4 cathode materials for lithium-ion batteries

LiFePO4/C Cathode Materials Synthesized by Co-Precipitation and Microwave Heating

Preparation of LiFePO4 with inverse opal structure and its satisfactory electrochemical properties

Preparation and Research Progress of LiFePO_4 Cathode Material

Concentration-Controlled and Phytic Acid-Assisted Synthesis of Self-Assembled LiFePO4 As Cathode Materials for Lithium-Ion Battery

Synthesis and Characterization of a LiFe 0.6 Mn 0.4 PO 4 Olivine Cathode for Application in a New Lithium Polymer Battery

Electrochemical Properties of LiFePO4/C Cathode Materials Prepared under Vacuum Conditions

High‐Rate LiFePO4 Electrode Material Synthesized by a Novel Route from FePO4 · 4H2O

Synthesis of Cathode Material LiFePO4 for Rechargeable Lithium-Ion Battery by Co-Precipitation Method

Preparation and Characterization of High-Density Spherical Li0.97Cr0.01FePO4/C Cathode Material for Lithium Ion Batteries