Abstract:Abstract All solid-state rechargeable lithium metal batteries (SS-LMBs) are gaining more and more importance because of their higher safety and higher energy densities in comparison to their liquid-based counterparts. In spite of this potential, their low discharge capacities and poor rate performances limit them to be used as state-of-the-art SS-LMBs. This arise due to the low intrinsic ionic and electronic transport pathways within the solid components in the cathode during the fast charge/discharge processes. Therefore, it is necessary to have a cathode with good electron conducting channels to increase the active material utilization without blocking the movement of lithium ions. Since SS-LMBs require a different morphology and composition of the cathode, we selected LiFePO 4 (LFP) as a prototype and, we have systematically studied the influence of the cathode composition by varying the contents of active material LFP, conductive additives (super C65 conductive carbon black and conductive graphite), ion conducting components (PEO and LiTFSI) in order to elucidate the best ion as well as electron conduction morphology in the cathode. In addition, a comparative study on different cathode slurry preparation methods was made, wherein ball milling was found to reduce the particle size and increase the homogeneity of LFP which further aids fast Li ion transport throughout the electrode. The SEM analysis of the resulting calendered electrode shows the formation of non-porous and crack-free structures with the presence of conductive graphite throughout the electrode. As a result, the optimum LFP cathode composition with solid polymer nanocomposite electrolyte (SPNE) delivered higher initial discharge capacities of 114 mAh g -1 at 0.2C rate at 30 °C and 141 mAh g -1 at 1C rate at 70 °C. When the current rate was increased to 2C, the electrode still delivered high discharge capacity of 82 mAh g -1 even after 500 cycle, which indicates that the optimum cathode formulation is one of the important parameters in building high rate and long cycle performing SS-LMBs.

Synthesis and Characterization of a LiFe 0.6 Mn 0.4 PO 4 Olivine Cathode for Application in a New Lithium Polymer Battery

Synthesis and Characterization of a LiFe0.6Mn0.4PO4 Olivine Cathode for Application in a New Lithium Polymer Battery

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Engineering Manganese-rich Phospho-olivine Cathode Materials with Exposed Crystal (010) Facets for Practical Li-ion Batteries

Engineering Manganese-Rich Phospho-Olivine Cathode Materials with Exposed Crystal {0 1 0} Facets for Practical Li-ion Batteries

High power performance of multicomponent olivine cathode material for lithium-ion batteries

A Promising Solid‐State Synthesis of LiMn 1‐ y Fe y PO 4 Cathode for Lithium‐ion Batteries

Ultrahigh Rate Capability of Manganese Based Olivine Cathodes Enabled by Interfacial Electron Transport Enhancement

LiMPO4 and Derived NaMPO4 (M = Mn, Fe, Mg) with Excellent Electrochemical Properties for Lithium/sodium Ion Batteries

Heavily vanadium-doped LiFePO4 olivine as electrode material for Li-ion aqueous rechargeable batteries

Pathway for high-energy density LiMnFePO4 cathodes

Green Phytic Acid-Assisted Synthesis of LiMn1-xFexPO4/C Cathodes for High-Performance Lithium-Ion Batteries

Unravelling the ion transport and the interphase properties of a mixed olivine cathode for Na-ion battery

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

Na/Co dual-doped olivine LiMn0.6Fe0.4PO4 cathode with superior reaction kinetics for Li-ion batteries

Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries

Effect of Heteroatom Doping on Electrochemical Properties of Olivine LiFePO4 Cathodes for High-Performance Lithium-Ion Batteries

Tuning of composition and morphology of LiFePO4 cathode for applications in all solid-state lithium metal batteries

Enhanced Electrochemical Performance of LiFePO4 Originating from the Synergistic Effect of ZnO and C Co-Modification

A Novel UV-Cured Semi-IPN Structure PEO@Nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

Mn-Rich Induced Alteration on Band Gap and Cycling Stability Properties of LiMnxFe1-xPO4 Cathode Materials.