Abstract:LiMnxFe1-xPO4 (LMFP) cathodes in lithium-ion batteries (LIBs) can improve the energy density by up to 15% compared to LiFePO4. However, the smaller primary particle size needed to overcome sluggish Mn2+/3+ redox kinetics results in lower electrode density, limiting the practical energy density of LMFP cells. We present here a scalable, wastewater-free synthesis of high energy density LMFP cathodes by employing a spinel LiMnFeO4 precursor obtained by a facile solid-state reaction. The LMFP synthesized with LiMnFeO4, referred to as S-LMFP, has a larger primary particle size and greater tap density than LMFP synthesized with a conventional co-precipitation route, referred to as P-LMFP. While S-LMFP offers a lower specific capacity (147 mA h g-1) than P-LMFP (153 mA h g-1) at C/5 rate due to inferior Li+ diffusion kinetics during Mn2+/3+ redox, it exhibits a ~ 15% higher electrode-level energy density due to its exceptional electrode packing density (2.6 g cm-3). Rate capability testing of LMFP cathodes with different electrode densities reveals that at low rates (< 1C), electrode density is more important than specific capacity in determining the energy density of LMFP cathodes. Overall, this work highlights the complex tradeoff between Mn2+/3+ redox kinetics and electrode density, which dictates the practical energy density of LMFP cathodes. With further optimization of composition, particle size, and synthesis conditions, LMFP synthesized from LiMnFeO4 is promising to improve the energy density of the next genertaion of LIBs.

Green Phytic Acid-Assisted Synthesis of LiMn1-xFexPO4/C Cathodes for High-Performance Lithium-Ion Batteries

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Engineering Manganese-rich Phospho-olivine Cathode Materials with Exposed Crystal (010) Facets for Practical Li-ion Batteries

Engineering Manganese-Rich Phospho-Olivine Cathode Materials with Exposed Crystal {0 1 0} Facets for Practical Li-ion Batteries

Based on first-principles calculation, study on the synthesis, and performance of Fe–Ni co-doped LiMnPO4/C as cathode material for lithium-ion batteries

High power performance of multicomponent olivine cathode material for lithium-ion batteries

Enhancing electrochemical performance of Mn doped LiFePO4 cathode materials for lithium-ion batteries

Pathway for high-energy density LiMnFePO4 cathodes

Preparation and Electrochemical Properties of Carbon-Coated LiMn0.6Fe0.4PO4 Cathode Material for Lithium-Ion Batteries

Effect of Heteroatom Doping on Electrochemical Properties of Olivine LiFePO4 Cathodes for High-Performance Lithium-Ion Batteries

Mn-Rich Induced Alteration on Band Gap and Cycling Stability Properties of LiMnxFe1-xPO4 Cathode Materials.

Heterogeneous Synthesis and Electrochemical Performance of LiMnPO4/C Composites As Cathode Materials of Lithium Ion Batteries

Mn-doped LiFePO 4 @C as a high-performance cathode material for lithium-ion batteries

Concentration‐gradient structural LiFe0.5Mn0.5PO4/C prepared via co‐precipitation reaction for advanced lithium‐ion batteries

A Promising Solid‐State Synthesis of LiMn 1‐ y Fe y PO 4 Cathode for Lithium‐ion Batteries

Ultrahigh Rate Capability of Manganese Based Olivine Cathodes Enabled by Interfacial Electron Transport Enhancement

Preparation of LiFePO₄/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

A critical revelation of lithium ferromanganese phosphate (LMFP) performance in a Mn-rich cathode for Li-ion batteries using Fe equivalents to occupy a Mn site

Preparation of LiFePO4/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Scalable, low-cost synthesis of high volumetric capacity LiMn0.5Fe0.5PO4 cathode for lithium-ion batteries

Preparation of LiFePO<sub>4</sub>/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications