Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

Electrochemical Properties of LiFePO4/C Cathode Materials Prepared under Vacuum Conditions

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Synthesis, characterization and properties of LiFePO4/C cathode material

Effect of vacuum assistance on the morphology and electrochemical properties of LiMn0.2Fe0.8PO4/C composites prepared by solid-phase method

Synthesis and Electrochemical Performance of LiFePO4/C Prepared by a New Method

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Electrochemical Performance of LiFe1−xVxPO4/carbon Composites Prepared by Solid-State Reaction

Electrochemical Performance of LiFePO 4 /(c+fe 2 P) Composite Cathode Material Synthesized by Sol-Gel Method

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Preparation and Electrochemical Performance of LiFePO_4/C Using Fe_2O_3 As Raw Material

Electrochemical property of LiFePO4/C composite cathode with different carbon sources

Preparation of LiFePO<sub>4</sub>/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Fabrication and electrochemical properties of LiFePO4/C cathode materials

Improved Electrochemical Performances of LiFePO4·Li3V2(PO4)/C Composite Cathode Materials Prepared by Two Simple Solid-State Methods

Preparation and Electrochemical Properties of High-performance LiFePO_4

Structural and Electrochemical Properties of Multihollow LiFePO[sub 4] for Lithium Battery Cathodes

LiFePO<sub>4</sub>/C Cathode Materials Prepared by One-Step Fast Carbothermal Method Using Fe<sub>2</sub>O<sub>3</sub> as Raw Materials

Preparation and Electrochemical Performance of 2life1–xcoxpo4–li3v2(po4)3/c Cathode Material for Lithium-Ion Batteries

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance