Abstract:The LiMnxFe1-xPO4/C (x = 0.5, 0.6, and 0.7) cathode materials for lithium-ion batteries were synthesized by polyethylene glycol (PEG) 400 as the carbon source via a combination of wet ball-milling and high-temperature solid-state reaction. The analysis results of X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) indicate that the as-prepared LiMn0.6Fe0.4PO4/C sample has a single-phase orthorhombic olivine structure, and the majority of particle sizes range from 100 to 200 nm with a ~2-3 nm carbon coating layer. The electrochemical measurements demonstrate that the obtained LiMn0.6Fe0.4PO4/C composite possesses preferable Li-ion storage properties, and the discharge capacity of 137.7 mAh g-1 at 1 C rate, which is 83.6% of that at 0.1 C rate. The composite also exhibits outstanding cycling stability, with a capacity retention of 98.2% after 100 cycles at 0.2 C rate. And the differential capacity analysis (dQ/dV) reveals that the dominating degradation of LiMn0.6Fe0.4PO4/C is caused by the Mn2+ /Mn3+ redox capacity loss which is located at ~4.12/3.96V, whether during the charge or discharge process. Moreover, the LiMn0.6Fe0.4PO4/C sample delivers excellent high-temperature performances (45 °C), with improved reversible capacity and capacity retention of 148.7 mAh g-1 and 99.3% after 80 cycles at 0.5 C rate, respectively.

Synthesis, characterization, and electrochemical performance of LiFePO4/C cathode materials for lithium ion batteries using various carbon sources: best results by using polystyrene nano-spheres

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Synthesis, characterization and properties of LiFePO4/C cathode material

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Nano-scale hollow structure carbon-coated LiFePO4 as cathode material for lithium ion battery

Synthesis of LiFePO4/C Composite As a Cathode Material for Lithium-Ion Battery by a Novel Two-Step Method

Electrochemical property of LiFePO4/C composite cathode with different carbon sources

Li 0.99 Ti 0.01 FePO 4 /C composite as cathode material for lithium ion battery

Electrochemical Performance of Carbon-Coated Li3V2(PO4)3 Cathode Materials Derived from Polystyrene-Based Carbon-Thermal Reduction Synthesis

Synthesis and electrochemical properties of LiFePO4/C composite cathode materials

Improvement of Electrochemical Performance of LiFePO4 Cathode Materials for Lithium-Ion Battery

In Situ Synthesis and Properties of Carbon-Coated Lifepo4 As Li-Ion Battery Cathodes

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance

Li<sub>0.99</sub>Ti<sub>0.01</sub>FePO<sub>4</sub>/C composite as cathode material for lithium ion battery

Effect of Carbon Coating on Low Temperature Electrochemical Performance of Lifepo4/C by Using Polystyrene Sphere As Carbon Source

Synthesis and Electrochemical Performances of Nano-Particle Fepo4 and Ce-Doped Fepo4 Cathode Materials for Lithium Ion Batteries by Microemulsion Method

Inorganic-based Sol–gel Synthesis of Nano-Structured LiFePO 4 /C Composite Materials for Lithium Ion Batteries

Preparation and Electrochemical Properties of Carbon-Coated LiMn0.6Fe0.4PO4 Cathode Material for Lithium-Ion Batteries

Electrochemical Performance of LiFe1−xVxPO4/carbon Composites Prepared by Solid-State Reaction