Abstract:High-precision microelectromechanical system (MEMS) accelerometers have wide application in the military and civil fields. The closed-loop microaccelerometer interface circuit with switched capacitor topology has a high signal-to-noise ratio, wide bandwidth, good linearity, and easy implementation in complementary metal oxide semiconductor (CMOS) process. Aiming at the urgent need for high-precision MEMS accelerometers in geophones, we carried out relevant research on high-performance closed-loop application specific integrated circuit (ASIC) chips. According to the characteristics of the performance parameters and output signal of MEMS accelerometers used in geophones, a high-precision closed-loop interface ASIC chip based on electrostatic time-multiplexing feedback technology and proportion integration differentiation (PID) feedback control technology was designed and implemented. The interface circuit consisted of a low-noise charge-sensitive amplifier (CSA), a sampling and holding circuit, and a PID feedback circuit. We analyzed and optimized the noise characteristics of the interface circuit and used a capacitance compensation array method to eliminate misalignment of the sensitive element. The correlated double sampling (CDS) technology was used to eliminate low-frequency noise and offset of the interface circuit. The layout design and engineering batch chip were fabricated by a standard 0.35 μm CMOS process. The active area of the chip was 3.2 mm × 3 mm. We tested the performance of the accelerometer system with the following conditions: power dissipation of 7.7 mW with a 5 V power supply and noise density less than 0.5 μg/Hz1/2. The accelerometers had a sensitivity of 1.2 V/g and an input range of ±1.2 g. The nonlinearity was 0.15%, and the bias instability was about 50 μg.

Digital closed-loop micromachined accelerometer based on cascaded multi-stage-noise-shaping ∑?M

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

A Low-Power Digital Processing Circuit for Capacitive Accelerometer

A Sigma–delta Interface ASIC for Force-Feedback Micromachined Capacitive Accelerometer

A Novel Mash 2-1 Sigma-Delta A/D Converter with High-To-Low Conversion for Closed-Loop Mems Accelerometer Interface

A fourth-order 14-bit sigma-delta interface ASIC for MEMS accelerometer

A Fourth-Order Sigma-Delta Interface Circuit For Closed-Loop Micromachined Accelerometer

Design and Noise Analysis of A Sigma-Delta Capacitive Micromachined Accelerometer

A High-Performance Fourth-Order Sigma-Delta Micromachined Accelerometer

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

A High-Performance Closed-Loop Fourth-Order Sigma-Delta Micro-Machined Accelerometer

A Digital Readout Interface For A Surface Micromachined Mems Accelerometer With A Novel Loop Compensator

Study Of Closed-Loop High-Resolution Sigma-Delta For A Mems Accelerometer

A Novel Digital Closed Loop MEMS Accelerometer Utilizing a Charge Pump.

Research on High-Resolution Miniaturized MEMS Accelerometer Interface ASIC

Interface Circuit Of Sigma-Delta Accelerometer With On-Chip-Test Function

A Closed-Loop $\sigma\delta$ Interface for a High-Q Micromechanical Capacitive Accelerometer with 200 Ng/ $ \surd$ Hz Input Noise Density

A sigma-delta interface built-in self-test and calibration for microelectromechanical system accelerometer's utilizing interpolation method

Design and Simulation of A Multi-Finger Micromechanical Silicon Accelerometer

A 0.4 $\mu \text{g}$ Bias Instability and 1.2 $\mu \text{g}/\surd $ Hz Noise Floor MEMS Silicon Oscillating Accelerometer with CMOS Readout Circuit