Abstract:Micro-power ΔΣ modulators are suitable for low-bandwidth, high-precision applications, such as smart sensors, biomedical signal processing and battery-powered IoT devices. They achieve high SNR by oversampling and noise shaping, but higher order loops have stability problems. The multistage noise-shaping (MASH) technique solves this problem by realizing a high-order NTF with several low-order stages. However, for the MASH structure to be effective, the loop filter integrators must have high gain to avoid quantization noise leakage. Conventionally, they are realized by high-gain OTAs with gain-boosted cascode [1].However, they draw static bias current, and their biasing and common mode feedback (CMFB) make them unattractive in duty-cycled operation in IoT applications due to the long settling time. The floating-inverter amplifier (FIA) [2] does not require biasing and CMFB, which makes it an attractive option for IoT applications. However, cascade topologies are needed to achieve high gain in [2–3], which increases complexity and area since each stage contributes a pole and requires a reservoir capacitor (C <inf>RES</inf> ). An additional C <inf>RES</inf> is used in the output stage of [3] to optimize the settling performance and stability, which costs further area. This paper presents a dynamic-body-biasing assisted correlated level shifting (CLS) technique to boost the DC gain of a single-stage FIA with only one reservoir capacitor to above 66dB with minimal area overhead. This enables a fully dynamic MASH ADC that consumes 2.87μW while achieving 96.9dB DR and 94.0dB SNDR in 1kHz BW at an OSR of 125×, resulting in a SNDR-based Schreier FoM of 179.4dB.

A 2.87μW 1kHz-BW 94.0dB-SNDR 2-0 MASH ADC Using FIA with Dynamic-Body-Biasing Assisted CLS Technique.

An 18-Bit 2-2 MASH Delta-Sigma Modulator for Isolated Amplifier

A 0.5V 723nw 84.3Db-Sndr Dynamic Zoom ADC with CLS-Assisted Capacitively-Biased FIA

A 1.2-V 2.87-Μ W 94.0-Db SNDR Discrete-Time 2–0 MASH Delta-Sigma ADC

An 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers

A 94.6Db-Sndr 50Khz-Bw 1-1-1 MASH ADC Using OTA-FIA Based Integrators

A 153μw 26nv/√hz Readout Circuit with BW and Power Scalability Using Capacitively-Coupled Chopper Floating Inverter Amplifier Embedded in a Discrete-Time ΔΣ Modulator

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

A 2-2 MASH ΔΣ ADC with fast-charge CLS input buffer and dual double sampling achieving 103.3-dB SNDR and ±2.5-ppm/FSR INL

A 77.2-Db SNDR SAR ADC with a Segmented Comparator Logic Based on Compensatory SA Latch for FIA

A Sub-1μW 16-Bit Fully Dynamic Zoom ADC Compatible with Free-running and Incremental Modes Using Residue Feedforward and Extended Counting Techniques

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A Σδ Modulator Using Gain-Boost Class-C Inverter for Audio Applications.

An 18.2W 101.1dB DR Fully-Dynamic ADC with Partially-Feedback Noise- Shaping Quantizer and CLS-Embedded Two-Stage FIAs

An 18.2μW 101.1dB DR Fully-Dynamic ΔΣ ADC with Partially-Feedback Noise-Shaping Quantizer and CLS-Embedded Two-Stage FIAs.

A 10Mhz-Bw 85Db-Dr CT 0-4 MASH Delta-Sigma Modulator Achieving Plus Dbfs MSA

A 10Mhz-Bw 85Db-Dr CT 0-4 Mash Delta-Sigma Modulator Achieving +5dbfs MSA

A 77db SNDR 12.5mhz Bandwidth 0–1 MASH ∑Δ ADC Based on the Pipelined-SAR Structure

An 871nw 96.2Db-Sndr Pipelined NS SAR ADC Achieving 180.8Db-Fomsndr with a Charge-Efficient CLS-Assisted Two-Stage FIA

A Partially Feedback NSSAR Embedded Third-Order Delta–Sigma Modulator with Gain-Boosted Two-Stage FIAs

MASH ΣΔ Modulator with Filter Mismatch Shaping Technique