Abstract:This paper proposes a 4th‐order sturdy MASH 2‐0 noise shaping (NS) SAR ADC to solve the noise leakage issue in the conventional MASH structure. The 4th‐order NS is achieved by only using a 2‐0 topology, which is hardware efficient. Instead of eliminating the first‐stage quantization error, the proposed sturdy MASH 2‐0 NS SAR shapes it, achieving better robustness to PVT variables. Furthermore, owing to the first‐stage 2nd‐order NS capability, the impairments of the residue amplifier, including the gain error and nonlinearity, are 2nd‐order shaped. The proposed 4th‐order sturdy MASH 2‐0 NS SAR is implemented in a 28 nm CMOS process, which achieves a SNDR of 85.6 dB and a SFDR of 101.3 dB with 10 MHz BW at OSR of 10, resulting in a Schreier FoM of 178.8 dB/179.4 dB (in SNDR/DR) with power consumption of 4.8 mW. The multi‐stage noise shaping (MASH) ΣΔ ADC has a good potential to achieve high‐order noise shaping (NS) and high resolution. However, it suffers from quantization noise leakage caused by the mismatch between the analogue NS filter and the digital cancellation filter, which greatly degrades the ADC performance. The sturdy MASH topology of the ΣΔ ADC can solve the leakage issue, but it cannot be implemented using the NS SAR ADC due to structural limitations. This paper proposes a sturdy MASH 2‐0 NS SAR to solve the noise leakage issue. The 4th‐order NS is achieved by only using a 2‐0 topology, which is hardware efficient. Instead of eliminating the first‐stage quantization error, the proposed sturdy MASH 2‐0 NS SAR shapes it, achieving better robustness to PVT variables. Furthermore, owing to the first‐stage 2nd‐order NS capability, the impairments of the residue amplifier, including the gain error and nonlinearity, are 2nd‐order shaped. The proposed 4th‐order sturdy MASH 2‐0 NS SAR is implemented in a 28 nm CMOS process, which achieves a SNDR of 85.6 dB and a SFDR of 101.3 dB with 10 MHz BW at OSR of 10, resulting in a Schreier FoM of 178.8 dB/179.4 dB (in SNDR/DR) with power consumption of 4.8 mW.

A 2-2 MASH ΔΣ ADC with fast-charge CLS input buffer and dual double sampling achieving 103.3-dB SNDR and ±2.5-ppm/FSR INL

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

An 18-Bit 2-2 MASH Delta-Sigma Modulator for Isolated Amplifier

A 1.2-V 2.87-Μ W 94.0-Db SNDR Discrete-Time 2–0 MASH Delta-Sigma ADC

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 65-Nm Low-Power High-Linearity ΣΔ ADC for Audio Applications

A 2.87μW 1kHz-BW 94.0dB-SNDR 2-0 MASH ADC Using FIA with Dynamic-Body-Biasing Assisted CLS Technique.

An 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers

An 18.2W 101.1dB DR Fully-Dynamic ADC with Partially-Feedback Noise- Shaping Quantizer and CLS-Embedded Two-Stage FIAs

An 871 Nw 96.2 Db SNDR Pipelined Second-Order Noise-Shaping SAR ADC Employing Charge-Efficient CLS-Assisted Residue Amplifier

An 18.2μW 101.1dB DR Fully-Dynamic ΔΣ ADC with Partially-Feedback Noise-Shaping Quantizer and CLS-Embedded Two-Stage FIAs.

A 10 MHz‐BW 85 dB‐SNDR 4th‐order sturdy MASH 2‐0 noise shaping SAR ADC with 2nd‐order gain‐error‐shaping technique

A 94.6Db-Sndr 50Khz-Bw 1-1-1 MASH ADC Using OTA-FIA Based Integrators

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

A 2-Mw 70.7-Db SNDR 200-Ms/s Pipelined-SAR ADC Using Continuous-Time SAR-Assisted Detect-and-Skip and Open-Then-Close Correlated Level Shifting

A 22-Bit 34-uW Sturdy-MASH Digital Delta-Sigma Modulator with Nested Bus-Splitting and Resolution Enhancement

A 12-Bit 2-Gs/s Pipelined ADC Front-End Stage with Aperture Error Tuning and Split MDAC

A 0.014mm2 10Khz-Bw Zoom-Incremental-Counting ADC Achieving 103db SNDR and 100db Full-Scale CMRR