Abstract:Due to its excellent mechanical and radiation resistance performance, fine-grained tungsten becomes an ideal plasma facing material in fusion reactors. However, the preparation of fine-grained tungsten by ultrafine powder is faced with some problems, such as low density, coarse grain and not suitable for engineering production. In this paper, nano-tungsten powders prepared by “sol-spray drying–calcination–hydrogen thermal reduction” process were sintered by non-isothermal ordinary pressureless sintering, and the densification behavior and kinetic mechanism were investigated. The results show that there exists two stages during sintering process, namely significant densification process at low temperature (1300–1700 °C) and grain growth stage at high temperature (1700–2000 °C). Finally, bulk tungsten material with the relative density of 96.9% and average grain size of 2–6 μm was prepared at 1900 °C. Moreover, electron backscatter diffraction results show the grain size is uniform and fine. By mathematical calculation, the nanocrystallization of tungsten powder significantly reduces the sintering activation energy and promotes the densification of tungsten powder at low temperature. Surface diffusion is the main transport mechanism in grain growth stage. It is easy to find that the hardness of material increased with the sintering temperature increasing, at the end of sintering densification (> 1700 °C), TEM observation revealed that the inner pores formed by particle combine were gradually eliminated through grain boundary diffusion with the sintering temperature increasing, resulting in the intra-crystal densification to increase the hardness of tungsten material.

Molecular Dynamics Simulation of Shock Consolidation of Nano Tungsten Powder

Shock-induced Consolidation of Tungsten Nanoparticles-a Molecular Dynamics Approach

High-pressure Preparation of Bulk Tungsten Material with Near-Full Densification and High Fracture Toughness

Experiment Study on the Hot-Shock Consolidation of Tungsten Powder

Compressibility And Strength Of Nanocrystalline Tungsten Boride Under Compression To 60gpa

Fabrication and Characterization of Pure Tungsten Using the Hot-Shock Consolidation

Shock-Induced Consolidation and Spallation of Cu Nanopowders

Tungsten-Copper Composite Fabricated by Hot-Shock Consolidation

Shock Consolidation of Ni/Al Nanoparticles: A Molecular Dynamics Simulation

Numerical simulation of the shock compaction of W/Cu powders

Preparation of Nanocrystalline Tungsten Powder and Study of Its Sinterability

Shock consolidation and the corresponding plasticity in nanopowdered Mg

Shock-induced plastic deformation of nanopowder Ti during consolidation and spallation

Abstract Submitted for the SHOCK11 Meeting of the American Physical Society Fabrication of W-Cu Composites by Hot-Shock Consolidation

Molecular Dynamic Simulation on Shock Plasticity Behaviour of Tungsten Alloy

Sintering Densification Behavior and Kinetic Mechanism of Nano-Tungsten Powder Prepared by Sol-Spray Drying

Strength Enhancement Of Nanocrystalline Tungsten Under High Pressure

A Novel Assembly Used for Hot-Shock Consolidation

Experimental Study on the Shock Consolidation of Ti+Si Powders

Characterization of fine-grained W–10wt.% Cu composite fabricated by hot-shock consolidation

Molecular Dynamics Simulation of Nanoporous Tungsten