Abstract:It is challenging for laser powder bed fusion (LPBF) technique to fabricate metal parts with a wall thickness below 100 μm. This work investigated the critical conditions for achieving extremely thin wall thickness in tungsten grids fabricated via LPBF. Specifically, the impact of low energy density on the printability of tungsten single tracks and grids via LPBF was comprehensively examined. A computational fluid dynamics approach was employed to develop a thermal fluid flow model for single tracks with multilayers in LPBF. The findings demonstrate that at low energy densities, single tracks exhibit four different morphologies, i.e., balling, discontinuity and winding, discontinuity but straightness, as well as continuity and straightness. The simulation model effectively elucidates the continuity of single tracks and provides insights into the governing mechanism of molten pool defects. Due to high thermal diffusion properties of tungsten, the continuity of its track relies on the connection of neighboring molten pools and is sensitive to scanning speed. The tungsten molten pools with low energy density can be categorized into shallow flows affected by surface morphology and deep flows influenced by internal voids of the powder bed. After multi-layer stacking, the track fluctuations and defects in single tracks accumulated into greater surface roughness and deteriorate thin-walled morphology. The critical conditions required for printing extremely thin walls were achieved, ensuring minimal merging of tracks between two layers by maintaining the energy density of 57 J/mm 3 . Based on these findings, an ultra-thin-walled anti-scattering tungsten grid with a wall thickness of 86 μm and a wall roughness below 3.3 μm ( Ra ) was fabricated by LPBF. This work provides valuable theoretical insights and presents a viable methodology for determining the minimum energy density threshold and wall thickness essential for LPBF processing of thin-walled components.

Melting and Solidifying Behavior in Single Layer Selective Laser of Pure Tungsten Powder

Balling Phenomena in Selective Laser Melted Tungsten

Selective laser melting fabricated tungsten with thin-walled structure: role of linear energy density on temperature evolution and manufacturing quality

Dense Pure Tungsten Fabricated by Selective Laser Melting

Simulation and Experimental Investigation on Additive Manufacturing of Highly Dense Pure Tungsten by Laser Powder Bed Fusion

Suppression of Cavitation in Melted Tungsten by Doping with Lanthanum Oxide

Effects of laser printing parameters on molten pool formation, microstructure evolution and mechanical properties of laser directed energy deposition of difficult-to-process tungsten heavy-alloy

Effect of Process Parameters and Layer Thickness on the Quality and Performance of Ti-6Al-4V Fabricated by Selective Laser Melting

Achieving high-performance pure tungsten by additive manufacturing: Processing, microstructural evolution and mechanical properties

Study on forming process and performance of nano-La 2 O 3 reinforced tungsten-based composites by selective laser melting

Molten pool behaviors and printability of tungsten anti-scattering grids with extremely thin wall thickness fabricated via laser powder bed fusion

Study on the Laser Melting Procedure for the Specified Zone of the TC4 Titanium Alloy

Mesoscopic Simulation of Core–Shell Composite Powder Materials by Selective Laser Melting

Preparation of high-density and excellent bending strength pure tungsten target by hot oscillatory pressing sintering and its magnetron sputtering coating

Effect of Processing Parameters on Thermal Phenomena in Direct Laser Metallic Powder Deposition

Stability of molten pool and microstructure evolution of Ti-6Al-4V during laser powder bed fusion with a flat-top beam

Cumulative effects of powder beds and melted areas on pore defects in electron beam powder bed fusion of tungsten

Microstructure and mechanical behavior of porous tungsten skeletons synthesized by selected laser melting

Particle scale modelling of melt pool dynamics and pore formation in selective laser melting additive manufacturing

Investigation on the ablation behavior of cemented tungsten carbide by a nanosecond UV laser

Process parameter optimization for selective laser melting Ti-6Al-4V with high layer thickness