Abstract:Characterization of the damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates by a combined experimental and finite element approach. In this paper, the mechanical properties, damage modes, and bolt load distribution of the bonded‐bolted hybrid three‐bolt joint were investigated by a combination of experiments and numerical simulations. Acoustic emission (AE) was used to monitor the tensile process of the connection in real time, and the K‐means clustering algorithm was used to realize the cluster analysis of the damage modes. A numerical simulation model of the tensile process of the joint was established using ABAQUS simulation software. The progressive damage evolution of composite laminates, and adhesive layer was characterized by using the VUMAT subroutine, the B‐K failure criterion, and cohesive element with zero thickness, respectively. The results show that four main damage modes occur in composite laminates during tension: matrix cracking, delamination, fiber pull‐out, and fiber breakage, with corresponding peak frequency ranges of (0–80 kHz), (80–210 kHz), (210–330 kHz), and (330–375 kHz), respectively. The adhesive layer between the laminates mainly exhibits peeling failure because of the secondary bending effect. In the load‐bearing process, the adhesive layer was loaded first and failed, and the bolt loading was delayed. Meanwhile, the results of bolt load distribution showed that the bolts and the adhesive layer at both ends carried greater loads. Highlights Damage modes and damage evolution of the bonded‐bolted hybrid joint in tension were analyzed by combining acoustic emission technology and numerical simulation. The simulation of delamination damage in composite laminates was carried out by inserting zero‐thickness cohesive elements into the laminates, and the delamination damage between the carbon fiber layup and the adjacent glass fiber layup was analyzed. The effect of the inclusion of the adhesive layer on the mechanical properties of the joint and the distribution of the bolt load was analyzed.

On the Mechanical Properties Detection Technology and Analysis of Composite Laminated Plate with Single-Lap Adhesive Bonding

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

The effects of environments and adhesive layer thickness on the failure modes of composite material bonded joints

EXPERIMENTAL INVESTIGATION ON ADHESIVE BONDED JOINTS OF CARBON FIBER COMPOSITE LAMINATES CONTAINING DISBOND DEFECT

A Study of the Effects of Moisture on Composite-to-Metal Double-Lap Shear Joints

Investigation on shear and fatigue performance of CFRP/aluminum alloy single-lap adhesive joint

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Influence of Adhesive Layer Properties on Laser-Generated Ultrasonic Waves in Thin Bonded Plates

Investigation of analysis and improvement of the assessment of bonding performance for thermoplastic composites

Effect of adhesive modification and surface treatment of laminates on the single lap bonding joint properties of carbon fibre composites

Finite Element Analysis of Adhesive Failure of Solid Composite Propellant Multi-material Structure for Underwater Intelligent Equipment

Parametric Investigation into the Shear Strength of Adhesively Bonded Single-Lap Joints

Study on mechanical behavior of adhesively bonded laminated envelope composite joints

Effect of Adhesive Layer Thickness on Strength of Carbon-Fiber-Reinforced Plastic/Aluminum Bond-Riveted Joints

Inspection of defects in composite structures using long pulse thermography and shearography

Experimental investigations of bolted, adhesively bonded and hybrid bolted/bonded single-lap joints in composite laminates

Testing of Thin Laminated Composite Plate with Ultrasonic Feature Scan Imaging System

Material and adhesive effect in adhesively-bonded composite stepped-lap joints

Investigation on mechanical property and failure mechanism of the carbon/glass hybrid laminate bolted joints using acoustic emission

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates

Effects of Curing Defects in Adhesive Layers on Carbon Fiber-Quartz Fiber Bonded Joint Performance