Abstract:Characterization of the damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates by a combined experimental and finite element approach. In this paper, the mechanical properties, damage modes, and bolt load distribution of the bonded‐bolted hybrid three‐bolt joint were investigated by a combination of experiments and numerical simulations. Acoustic emission (AE) was used to monitor the tensile process of the connection in real time, and the K‐means clustering algorithm was used to realize the cluster analysis of the damage modes. A numerical simulation model of the tensile process of the joint was established using ABAQUS simulation software. The progressive damage evolution of composite laminates, and adhesive layer was characterized by using the VUMAT subroutine, the B‐K failure criterion, and cohesive element with zero thickness, respectively. The results show that four main damage modes occur in composite laminates during tension: matrix cracking, delamination, fiber pull‐out, and fiber breakage, with corresponding peak frequency ranges of (0–80 kHz), (80–210 kHz), (210–330 kHz), and (330–375 kHz), respectively. The adhesive layer between the laminates mainly exhibits peeling failure because of the secondary bending effect. In the load‐bearing process, the adhesive layer was loaded first and failed, and the bolt loading was delayed. Meanwhile, the results of bolt load distribution showed that the bolts and the adhesive layer at both ends carried greater loads. Highlights Damage modes and damage evolution of the bonded‐bolted hybrid joint in tension were analyzed by combining acoustic emission technology and numerical simulation. The simulation of delamination damage in composite laminates was carried out by inserting zero‐thickness cohesive elements into the laminates, and the delamination damage between the carbon fiber layup and the adjacent glass fiber layup was analyzed. The effect of the inclusion of the adhesive layer on the mechanical properties of the joint and the distribution of the bolt load was analyzed.

Experimental investigations of bolted, adhesively bonded and hybrid bolted/bonded single-lap joints in composite laminates

A detailed experimental parametric analysis of bolted and hybrid bolted/bonded composite joints

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Selection and analysis of optimum stacking sequence and geometry dimensions on bismaleimides composite joints under tensile loading

Parametric study on the load-carrying capacity of plain-woven composites hybrid bonded-bolted joints

Experimental study of bonded, bolted, and hybrid braided CFRP joints with different stacking sequences and lapping patterns

Experimental Investigation of Double-Lap Bolted Composite Joints with Different Outer Plates Subjected to Bending Loads

Mechanical properties of all-C/C composite hybrid bonded/bolted joints

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates

Experiment and simulation study on bonded, bolted and hybrid bolted/bonded joints of textile CFRP using bimodulus constitutive model

Numerical and experimental investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints

The Tensile Behavior of Hybrid Bonded Bolted Composite Joints: 3D-Digital Image Correlation versus Finite Element Analysis

Experimental Investigation and Numerical Simulation of Bonded, Bolted, and Hybrid Joints in CFRP Laminates Under Tensile Loading

Tensile tests and strength estimation for double-lap single-bolt j oints in T800 carbon fiber reinforced composites

Experimental study of bonded, bolted, and hybrid bonded-bolted single lap shear joints with woven CFRP adherends

Material and adhesive effect in adhesively-bonded composite stepped-lap joints

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Behavior of hybrid bonded/bolted GFRP single-lap joint under static tensile loading: An experimental and numerical study

Experimental study of the influence of adhesive reinforcement in lap joints for composite structures subjected to mechanical loads

Study on mechanical behavior of adhesively bonded laminated envelope composite joints

Influence of π overlaminates on the mechanical behavior of all-composite adhesively bonded π joints