Abstract:Recently, residents in a specific urban area in China has complained against the noise pollution from a particular indoor substation. This paper aims at solving this problem through experimental investigations on the vibration and noise created by distribution transformers in the substation. Firstly, the noise around the distribution transformers, substation, and in the noise-sensitive room were measured. Secondly, through frequency characteristic analysis, the center frequencies at 250 Hz and 500 Hz with maximum values can be obtained and defined as main frequencies in this paper. Once the frequency of the main noises generated by the distribution transformers are identified, the sound absorbing structure, acoustic insulation structure, and vibration isolators were designed and installed. Following the treatment of noise pollution, the transformer and environment noise were reevaluated. The measurement results show that the integrated strategies proposed lead to effectively inhibiting the distribution transformer noise emitted into the surrounding environment. Consequently, the acoustic environment around the indoor substation was drastically improved. For this case study, the residential bedroom located above the substation is considered as a noise-sensitive room. The measurement following the treatment of noise shows that the average equivalent sound pressure level (SPL) in this room was successfully reduced approximately 6 dB at daytime and 10 dB at night, respectively. The corresponding measurement results illustrate that the SPL satisfied the requirement of limits of the ordinance.

A comparative study on main influencing factors of outdoor sound field distribution of transformer chamber—A case study of 220 kV indoor substation

Research on Lightning Protection of 220kv Substation with Long Cable Inlet Wire

Environmental noise pollution control of substation by passive vibration and acoustic reduction strategies

Analysis of Noise Environment and Noise Reduction Measures in Urban 110kV Indoor Substations

[Optimally Control Urban Railway Noise by Sound Propagation Path].

Noise Suppression Design of Residential District in Outskirts by Calculating Machine Simulation

A Study on the Control Indices and Emission Limits of Substation Noise

A Preliminary Study on Control Indices and Emission Limits of Substation Noise

Research on noise reduction methods for indoor substations based on resonant sound absorption

Influencing Factors Identification and Prediction of Noise Annoyance—A Case Study on Substation Noise

Investigation of Acoustic and Aerodynamic Noise in Air Conditioner Outdoor Unit

Noise Pollution Mitigation Method for Substations in Urban Communities Based on a Smart Silencing Unit

Optimizing air inlet designs for enhanced natural ventilation in indoor substations: A numerical modelling and CFD simulation study

Simulation Model of Sound Field in Street Space Caused by Noise Transmitted from Bordering Large Workshop Buildings

Research on lightning intruding waves in 220 kV GIS substation

Research on the Electromagnetic Environment of 220 Kv Four Circuits on One Tower Transmission Line

Analysis and improvement measures of noise reduction performance of assembled transformer room gate

Research on the Application of Acoustic Simulation Based on iNoise in the Evaluation of Factory Boundary Noise

Applying Virtual Sound Barrier At A Room Opening For Transformer Noise Control

Virtual Sound Barrier for Indoor Transformers

Simulations and Ground Experiments of Interior Noise for Space Station Module