Abstract:The performance of telescopes, important components of space interferometry systems, directly affects the accuracy of gravitational wave signals. Space gravitational wave telescopes typically employ an off-axis four-mirror system. When aligned, this system not only has multiple misalignments, but also exhibits interrelated aberrations from various misalignments. These characteristics may lead to difficult alignment of the telescope system as well as significant deviation between the position of the telescope after alignment and the ideal position. To address the aforementioned issues, first, a sensitivity matrix equation was established between the misalignment of optical components and the Fringe Zernike coefficients. Based on the sensitivity matrix equation, a damping least-squares evaluation function was constructed to reduce the significant deviation between the aligned and ideal positions. Second, a typical optical system of a space gravitational wave telescope was designed, and the sensitivity matrix was calculated. The relationship between the wavefront distortions caused by misalignments in each optical component was examined. To simplify telescope installation, a strategy using secondary mirrors as compensatory elements was proposed. Finally, to verify the effectiveness of the scheme, 200 sets of tolerance files were randomly generated. Based on the evaluation function of the damping least-squares method, a reasonable damping factor was set to limit the solution range of the misalignment amount, which enabled calculating the secondary mirror compensation amount. Experimental results indicate that after aligning the 200 random telescope files, the root-mean-square wavefront error was reduced to less than 0.0030λ, and the maximum error between the magnification after alignment and the ideal position magnification was only 0.57%, which confirms the feasibility of this alignment scheme.

Assembly and adjustment method based on aberrations correction for telescope optical system

Computer Aided Alignment of 20X Schwarzschild Projection Optics

Model Design for Adjustment Mechanism of Imaging Lens's Focal Length of Space Solar Telescope

Assembly and Calibration System for APS of Star Sensor

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

MODIFIED DESIGN AND STRUCTURAL ANALYSIS FOR ADJUSTMENT MECHANISM OF THE IMAGING LENS'S FOCAL LENGTH OF A SPACE SOLAR TELESCOPE

Simulation alignment of optical system for space gravitational wave telescope

Practical and Accurate Method for Aspheric Misalignment Aberrations Calibration in Non-Null Interferometric Testing

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry

An Alignment of Primary and Secondary Mirrors for Optical System in Large Telescopic

Method for establishing computer-aided alignment model based on optical component surface shape

Research on assembling and adjusting technology of aspherical refraction optical lens

Optical alignment technology for 1-meter accurate infrared magnetic system telescope

Location-grouping Algorithm Based on Limited Actuators Deformable Mirror for High Precision Wavefront Aberration Correction in Adaptive Optics System

Optical Pupil Shift Correction Method for Large Ground-Based Optical Telescopes

Active alignment of complex perturbed pupil-offset off-axis telescopes using the extension of nodal aberration theory

Aberration Correction Method for the Catadioptric Imaging System Design.

Pupil aberrations correction of the afocal telescope for the TianQin project

Telescope Alignment Method Using a Modified Stochastic Parallel Gradient Descent Algorithm

Off-axis telescope misalignment correction based on defocus spot moment features

The design and assembly of a long-focal-length telescope with aluminum mirrors