Abstract:Nitrided cylinder liner was difficult to meet the requirements of new high strength internal combustion engine because of its high surface stress and easy deformation. Micro surface textures with varied area density were prepared on the surface of nitrided cylinder in cylinder liner-PVD piston ring test rig by Nd-YAG pulse laser. The effect of pulse laser parameters on the morphology of micro-pit on the surface of the cylinder liner and the friction and wear properties of the friction pair were studied, and the influence mechanism was analyzed. It was found that the texture pit diameter increased with the increased of laser energy density, pulse number and defocusing distance, while the pit depth increased first and then decreased with the increased of laser energy density, pulse number and defocusing distance. Different area density texture had anti-friction and wear- resistant effect on cylinder liner-piston ring friction pairs. Compared with Un-textured cylinder liner friction pairs, the friction coefficient of micro-textured cylinder liner decreased by 10. 07%similar to 21. 58%. The wear loss decreased by 26. 71%similar to 46. 19%; The wear of piston ring specimen corresponding to micro-textured cylinder liner decreased by 10. 12%similar to 50. 19%; The cylinder scuffing time of micro-textured cylinder liner was increased by 2. 1 similar to 2. 8 times. The minimum friction coefficient, wear amount and the best anti-scuffing performance were obtained in the textured friction pair with an area density of 10%. The mechanism of micro-texture improving friction and wear performance of cylinder liner friction pair was to store lubricating oil, reduce the contact area of friction pair, capture debris resulted in the reduction of abrasive wear. The influence of textured nitrided cylinder liner on its tribological properties was summarized under high strengthening conditions, which provided experimental support for the development of high strength internal combustion engine.

Effect of laser surface micro-modeling on tribological properties

Influence of laser surface texturing on tribological performance of mechanical components

The effect of laser surface texturing on frictional performance of face seal

Effect Of Pulse Duration On Tribological Behavior Of Textured Stainless Steel By Laser Surface Texturing

Study of Laser Surface Texturing for Improving Tribological Properties

Effect of Number of Laser Pulses on Tribological Property of Textured-Coating

Tribological Properties of Laser Textured Surfaces on 45 Steel under Dry Friction

Effect of Laser Textured Surfaces on Tribological Properties of Fracturing Pump Plungers

Tribological Influence of Laser Surface Textures on 45 Steel under Dry Sliding

Surface Modification and Effects on Tribology by Laser Texturing in Al2O3.

Cooperative Effect of Surface Alloying and Laser Texturing on Tribological Performance of Lubricated Surfaces

Effects of Single- and Multi-Shape Laser-Textured Surfaces on Tribological Properties under Dry Friction

Analysis of synergistic friction reduction effect on micro-textured cemented carbide surface by laser processing

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Laser Surface-micropored Improving Tribological Properties of Face Seals

Research of femtosecond laser processing texture and influence of texture on tribological properties

Effect of Surface Texture Micro-pit Morphology and Area Density on Tribological Properties of Nitrided Cylinder Liner

A Study on Micro-Pit Texture Parameter Optimization and Its Tribological Properties

The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves

Laser Melting and Surface Texture Technology: Effect on Friction Properties

Effect of Nanosecond Laser Texturization on Tribological Behavior of AISI 321 Stainless Steel