Abstract:Purpose This paper aims to investigate the effect of laser surface texturing on the tribological performance of Ti-6Al-4V disks sliding against Si3N4 balls under hydroxyethyl-cellulose water-based lubrication. The friction coefficients and wear losses of textured and untextured disks were measured and compared. The results indicate that the texture patterns can lead to reduction of friction and wear in the condition of water-based lubrication. Design/methodology/approach Solutions of hydroxyethyl cellulose were used as water-based lubricants. To find the optimal laser texturing parameters for the best performance enhancement, three line-like patterns were fabricated onto the disks and three machining parameters were used for each type of pattern. Tribological tests were conducted in rotation sliding with ball-on-disk contact configuration on UMT-2. Findings A higher density of texture lines leads to a larger friction and wear reduction. Compared with untextured disks, the friction coefficient is reduced from 0.043 to 0.028 for textured disks. Some unworn parts were detected in the contact region of the balls against textured disks, which were not found on the balls against untextured disks. The worn surfaces indicated that periodic geometry of the contact track was rebuilt during run-in period, which was beneficial for the formation of lubricant films. Originality/value In this work, laser surface texturing was used to reduce the friction and wear of Ti-6Al-4V specimens in water-based lubrication, which can be used to improve the tribological performance of Ti-6Al-4V components in mechanical equipment.

Effects of Single- and Multi-Shape Laser-Textured Surfaces on Tribological Properties under Dry Friction

Tribological Properties of Laser Textured Surfaces on 45 Steel under Dry Friction

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Study of Laser Surface Texturing for Improving Tribological Properties

Experimental study on the tribological performance of fractal-like textured surface under mixed lubrication conditions

The Friction And Wear Behavior Of Laser Textured Surfaces In Non-Conformal Contact Under Starved Lubrication

Effect Of Pulse Duration On Tribological Behavior Of Textured Stainless Steel By Laser Surface Texturing

An Experimental Investigation of Tribological Performance of Triangular Textures in Water Lubrication Regime

Tribological Influence of Laser Surface Textures on 45 Steel under Dry Sliding

Surface Textures Fabricated by Laser Surface Texturing and Diamond Cutting - Influence of Texture Depth on Friction and Wear

Effects of Laser Surface Texturing on Tribological Properties of Ti-6Al-4V in Hydroxyethyl-Cellulose Water-Based Lubrication

Tribological Properties of Steel Surface Textured by Laser under Lubrication

Experimental Study of the Effect of Surface Texturing on the Lubrication Performance in Point Contacts

Effects of Texture Density on Tribological Performance of Laser Peen Textured Surface

Effect of Number of Laser Pulses on Tribological Property of Textured-Coating

Effect of Geometric Micro-Groove Texture Patterns on Tribological Performance of Stainless Steel

Influence of Cross-Grooved Texture Shape on Tribological Performance under Mixed Lubrication

Effect of laser surface micro-modeling on tribological properties

Effect of Laser-Induced Texture on Lubrication Retention and Tribological Properties of 40cr Alloy Surfaces

Tribological behavior of steel surface texturing by laser in graphite or oil lubrication

The effect of laser surface texturing on frictional performance of face seal