Abstract:Quenching experiments were performed with hot stainless steel spheres in a pool of water-based nanofluids in the presence of carbon nanotubes (CNTs) of various sizes. In order to explore the size effect, a test matrix was developed by choosing multi-walled CNTs with lengths from 1 μm to 5 μm and outer diameters from 30 nm to 60 nm. The concentration was fixed at 0.5% by mass for all types of CNTs. The initial temperature was 400 °C and the transient temperature variations at the center of the sphere were recorded as quenching curves. By establishing a lumped capacitance model, the transient surface heat flux variations were obtained as boiling curves. The original and boiled surfaces were both subjected to a series of characterizations to determine the changes in morphology, roughness, and wettability to identify the effects of CNT size on the surface properties of the formed deposition layers as well as to elucidate the mechanisms for regulation of the boiling and quenching behaviors. The results suggested that the critical heat flux (CHF) and the Leidenfrost point (LFP) are enhanced to various degrees due to the discrepancy in the size of the CNTs in nanofluids. It was shown that the CNTs deposited on the surfaces create various morphologies depending on their size. The CNTs with a length of 5 μm and a diameter of 60 nm exhibited the most significant effect on the boiling behaviors. In comparison to CNTs with a shorter length of 1 μm, the 5 μm long CNTs were much easier to form porous layers. The results of the contact angle and roughness tests showed that the porous layers tend to affect the surface roughness instead of surface wettability. The increases of the nucleation site density and surface roughness due to the presence of porous layers were identified as the primary cause for the modified boiling behaviors during quenching.

Heat Transfer Characteristics of Nanostructured Surface Quenched in Liquid Nitrogen

Experiment for influence of boiling surface on critical heat flux in liquid nitrogen pool boiling

Boiling and quenching heat transfer advancement by nanoscale surface modification

Enhanced pool boiling heat transfer during quenching on micro/nanostructured wicking surface: effects of submicron-scale substructures

An Experimental Study of Boiling Heat Transfer During Quenching of Nanofluids with Carbon Nanotubes of Various Sizes

Pool Boiling Heat Transfer During Quenching in Carbon Nanotube (Cnt)-Based Aqueous Nanofluids: Effects of Length and Diameter of the CNTs

Quenching boiling of aqueous suspensions with carbon nanotubes

Regulated Transient Pool Boiling of Water During Quenching on Nanostructured Surfaces with Modified Wettability from Superhydrophilic to Superhydrophobic

Study of Pool Boiling Heat Transfer on Concave Nanostructured Surface With Molecular Dynamics Simulation

Boiling heat transfer on the micro-nano structured surface fabricated by mechanical sandblasting/alkali-assisted oxidation

Pool Boiling Heat Transfer on a Nanoscale Roughness-Enhanced Superhydrophilic Surface for Accelerated Quenching in Water

Boiling Heat Transfer Enhancement of Nanofluids on a Smooth Surface with Agitation

The microchannel combined hydrophobic nanostructure for enhancing boiling heat transfer

Enhancing Heat Transfer Performance of Nitrogen Condensation on Vertical Plate with Microstructure

Nucleate boiling performance on nano/microstructures with different wetting surfaces

Nanoscale Investigation of Bubble Nucleation and Boiling on Random Rough Surfaces

Experimental Study of Heat Transfer During Quenching of Steel Cylinders in Boiling Nanofluid

Geometric Effects on Boiling Heat Transfer Performance: A Molecular Dynamics Study

Enhancement of Metal Boiling Heat Transfer Performance on Micro-Nano Structure Surface Prepared by Femtosecond Laser

Experimental Investigation of Spray Cooling on Micro-, Nano- and Hybrid-Structured Surfaces

Nanoscale Thin-Film Boiling Processes on Heterogeneous Surfaces