Abstract:Quenching experiments were performed with hot stainless steel spheres in a pool of water-based nanofluids in the presence of carbon nanotubes (CNTs) of various sizes. In order to explore the size effect, a test matrix was developed by choosing multi-walled CNTs with lengths from 1 μm to 5 μm and outer diameters from 30 nm to 60 nm. The concentration was fixed at 0.5% by mass for all types of CNTs. The initial temperature was 400 °C and the transient temperature variations at the center of the sphere were recorded as quenching curves. By establishing a lumped capacitance model, the transient surface heat flux variations were obtained as boiling curves. The original and boiled surfaces were both subjected to a series of characterizations to determine the changes in morphology, roughness, and wettability to identify the effects of CNT size on the surface properties of the formed deposition layers as well as to elucidate the mechanisms for regulation of the boiling and quenching behaviors. The results suggested that the critical heat flux (CHF) and the Leidenfrost point (LFP) are enhanced to various degrees due to the discrepancy in the size of the CNTs in nanofluids. It was shown that the CNTs deposited on the surfaces create various morphologies depending on their size. The CNTs with a length of 5 μm and a diameter of 60 nm exhibited the most significant effect on the boiling behaviors. In comparison to CNTs with a shorter length of 1 μm, the 5 μm long CNTs were much easier to form porous layers. The results of the contact angle and roughness tests showed that the porous layers tend to affect the surface roughness instead of surface wettability. The increases of the nucleation site density and surface roughness due to the presence of porous layers were identified as the primary cause for the modified boiling behaviors during quenching.

Pool Boiling Heat Transfer During Quenching in Carbon Nanotube (Cnt)-Based Aqueous Nanofluids: Effects of Length and Diameter of the CNTs

An Experimental Study of Boiling Heat Transfer During Quenching of Nanofluids with Carbon Nanotubes of Various Sizes

Thermo-physical properties of water-based single-walled carbon nanotube nanofluid as advanced coolant

Experimental study on the thermal conductivity enhancement of water based nanofluids using different types of carbon nanotubes

Quenching boiling of aqueous suspensions with carbon nanotubes

Effects of Surface Modification on the Pool Boiling Heat Transfer of MWNTs/water Nanofluids

Enhanced pool boiling heat transfer during quenching on micro/nanostructured wicking surface: effects of submicron-scale substructures

Supercooling Behaviour and Non-Isothermal Crystallization Processes of Aqueous Suspensions of Carbon Nanotubes

Experimental Investigation and Modelling on the Thermal Conductivity of CNTs Based Nanofluids

Regulated Transient Pool Boiling of Water During Quenching on Nanostructured Surfaces with Modified Wettability from Superhydrophilic to Superhydrophobic

Solidification characteristic enhancement of aqueous nanofluid with different carbon nanotube sizes

Study of flow boiling heat transfer characteristics of critical heat flux using carbon nanotubes and water nanofluid

Experimental Study on Forced Convective Heat Transfer of CNT Nanofluids in Microtube

Water Transport Phenomena Through Membranes Consisting of Vertically-Aligned Double-Walled Carbon Nanotube Array

Pool Boiling Heat Transfer on a Nanoscale Roughness-Enhanced Superhydrophilic Surface for Accelerated Quenching in Water

Boiling and quenching heat transfer advancement by nanoscale surface modification

Molecular study on convective heat transfer of nanofluid in nanochannel: effect of CNT particles

Effective thermal conductivity of carbon nanotube-based nanofluid

Characteristic Boiling Curve of Carbon Nanotube Nanofluid As Determined by the Transient Calorimeter Technique

Thermal Conductivity Enhancements and Viscosity Properties of Water Based Nanofluid Containing Carbon Nanotubes Decorated with Ag Nanoparticles

Particulate Fouling During the Pool Boiling Heat Transfer of Mwcnt Nanofluid