Abstract:Quenching experiments were performed with hot stainless steel spheres in a pool of water-based nanofluids in the presence of carbon nanotubes (CNTs) of various sizes. In order to explore the size effect, a test matrix was developed by choosing multi-walled CNTs with lengths from 1 μm to 5 μm and outer diameters from 30 nm to 60 nm. The concentration was fixed at 0.5% by mass for all types of CNTs. The initial temperature was 400 °C and the transient temperature variations at the center of the sphere were recorded as quenching curves. By establishing a lumped capacitance model, the transient surface heat flux variations were obtained as boiling curves. The original and boiled surfaces were both subjected to a series of characterizations to determine the changes in morphology, roughness, and wettability to identify the effects of CNT size on the surface properties of the formed deposition layers as well as to elucidate the mechanisms for regulation of the boiling and quenching behaviors. The results suggested that the critical heat flux (CHF) and the Leidenfrost point (LFP) are enhanced to various degrees due to the discrepancy in the size of the CNTs in nanofluids. It was shown that the CNTs deposited on the surfaces create various morphologies depending on their size. The CNTs with a length of 5 μm and a diameter of 60 nm exhibited the most significant effect on the boiling behaviors. In comparison to CNTs with a shorter length of 1 μm, the 5 μm long CNTs were much easier to form porous layers. The results of the contact angle and roughness tests showed that the porous layers tend to affect the surface roughness instead of surface wettability. The increases of the nucleation site density and surface roughness due to the presence of porous layers were identified as the primary cause for the modified boiling behaviors during quenching.

Supercooling Behaviour and Non-Isothermal Crystallization Processes of Aqueous Suspensions of Carbon Nanotubes

Non-Isothermal Crystallization of Aqueous Nanofluids with High Aspect-Ratio Carbon Nano-Additives for Cold Thermal Energy Storage

Thermo-physical properties of water-based single-walled carbon nanotube nanofluid as advanced coolant

Effects of Nanoparticles and Sample Containers on Crystallization Supercooling Degree of Nanofluids

Experimental study on the thermal conductivity enhancement of water based nanofluids using different types of carbon nanotubes

Solidification Behavior of Hybrid Tio2 Nanofluids Containing Nanotubes and Nanoplatelets for Cold Thermal Energy Storage

Quenching boiling of aqueous suspensions with carbon nanotubes

Improving the Supercooling Degree of TiO2 Suspensions by Coupling with Zirconium Phosphate Nanoplatelets

Pool Boiling Heat Transfer During Quenching in Carbon Nanotube (Cnt)-Based Aqueous Nanofluids: Effects of Length and Diameter of the CNTs

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

Carbon Nanotube-Based Super Nanotubes: Tunable Thermal Conductivity in Three Dimensions

An Experimental Study of Boiling Heat Transfer During Quenching of Nanofluids with Carbon Nanotubes of Various Sizes

The Interface Effect Of Carbon Nanotube Suspension On The Thermal Performance Of A Two-Phase Closed Thermosyphon

Boiling characteristics of carbon nanotube suspension in gravity-assisted thermosyphon

Solidification characteristic enhancement of aqueous nanofluid with different carbon nanotube sizes

Modeling of thermocapillary flow to purify single-walled carbon nanotubes

Ultrahigh Convergent Thermal Conductivity of Carbon Nanotubes from Comprehensive Atomistic Modeling

Thermal Conductivity Reduction in Carbon Nanotube by Fullerene Encapsulation: A Molecular Dynamics Study

Effects of Nanostructure Additives on Supercooling and Freezing of Distilled Water

Experimental Study On Thermophysical Properties Of Nanotubes And Nanofluids

Understanding Interfacial Dynamics: Hydrostatic Pressure-Induced Sono-Dispersion of Carbon Nanotubes