Flow boiling of liquid nitrogen in a horizontal macro-tube at low pressure: Part I - flow pattern, two-phase flow instability, and pressure drop
Yuan Gao,Zuoxia Wang,Yulong Li,Enze Ma,Heng Yu
DOI: https://doi.org/10.1016/j.ijheatfluidflow.2024.109335
IF: 2.643
2024-03-09
International Journal of Heat and Fluid Flow
Abstract:Liquid nitrogen holds significant importance in high-temperature superconductivity. This study experimentally investigates the saturated flow boiling of liquid nitrogen in a horizontal macro-tube with an inner diameter of 10 mm. The experiments cover the following ranges: inlet gauge pressure from −31.0 to 2.5 kPa, mass flux from 27.0 to 71.3 kg/(m 2 ·s), heat flux from 0 to 28.68 kW/m 2 , and vapor quality from 0 to 1. In the initial segment of the study, this paper concentrates on flow patterns, two-phase flow instability, and pressure drop. Flow patterns are identified by analyzing temperature distributions along the tube and oscillations of operating parameters. The two-phase flow patterns mainly comprise bubbly flow, plug and slug flow, stratified flow and wavy flow, annular flow, mist and vapor flow. Annular flow tends to occur under negative pressure due to the increased vapor velocity resulting from decreased vapor density. Oscillations are observed in plug and slug flow, with the pressure drop and wall temperature displaying a small period and a strong relationship. The oscillations in pressure drop and wall temperature are linked to the periodic formation and release of large bubbles in plug and slug flow. Thermal oscillation exhibits a strong correlation with flow patterns. For vapor quality less than 0.2, the amplitude of wall temperature oscillations is larger, attributed to the occurrence of plug and slug flow. The experimental data of the total pressure drop are compared with predicted values from the homogeneous and separated flow models. The separated flow model provides a more accurate prediction, with a Mean Relative Error (MRE) of 39 % within the present experimental range.
engineering, mechanical,thermodynamics,mechanics