Abstract:Increased cooling requirements of many compact systems involving high heat fluxes demand the development of high-performance cooling techniques including immersion cooling utilizing pool boiling. This study presents the functionalization of copper surfaces to create interfaces for enhanced pool boiling heat transfer. Three types of surface structures including a crosshatch pattern, shallow channels and deep channels were developed using nanosecond laser texturing to modify the surface micro- and nanomorphology. Each type of surface structure was tested in the as-prepared superhydrophilic state and superhydrophobic state following hydrophobization, achieved through the application of a nanoscale self-assembled monolayer of a fluorinated silane. Boiling performance evaluation was conducted through three consecutive runs under saturated conditions at atmospheric pressure utilizing water as the coolant. All functionalized surfaces exhibited enhanced boiling heat transfer performance in comparison with an untreated reference. The highest critical heat flux of 1697 kW m−2 was achieved on the hydrophobized surface with shallow channels. The highest heat transfer coefficient of 291.4 kW m−2 K−1 was recorded on the hydrophobized surface with deep channels at CHF incipience, which represents a 775% enhancement over the highest values recorded on the untreated reference. Surface microstructure was identified as the key reason for enhanced heat transfer parameters. Despite large differences in surface wettability, hydrophobized surfaces exhibited comparable (or even higher) CHF values in comparison with their hydrophilic counterparts, which are traditionally considered as more favorable for achieving high CHF values. A significant reduction in bubble departure diameter was observed on the hydrophobized surface with deep channels and is attributed to effective vapor entrapment, which is pointed out as a major contributing reason behind the observed extreme boiling heat transfer performance.

Boiling heat transfer on the micro-nano structured surface fabricated by mechanical sandblasting/alkali-assisted oxidation

Enhanced pool boiling heat transfer during quenching on micro/nanostructured wicking surface: effects of submicron-scale substructures

Effects of Surface Modification on the Pool Boiling Heat Transfer of MWNTs/water Nanofluids

Boiling and quenching heat transfer advancement by nanoscale surface modification

Boiling performance enhancement and self-recovery of nucleate boiling regime on micro- and nanostructured porous surfaces

Nucleate boiling performance on nano/microstructures with different wetting surfaces

In-situ hierarchical micro/nanocrystals on copper substrate for enhanced boiling performance: an experimental study

The microchannel combined hydrophobic nanostructure for enhancing boiling heat transfer

Regulated Transient Pool Boiling of Water During Quenching on Nanostructured Surfaces with Modified Wettability from Superhydrophilic to Superhydrophobic

Nanosecond Laser-Textured Copper Surfaces Hydrophobized with Self-Assembled Monolayers for Enhanced Pool Boiling Heat Transfer

Nanoscale Thin-Film Boiling Processes on Heterogeneous Surfaces

Study of Pool Boiling Heat Transfer on Concave Nanostructured Surface With Molecular Dynamics Simulation

Experimental Study of Contact Angle and Active Nuleation Site Distribution on Nanostructure Modified Copper Surface in Pool Boiling Heat Transfer Enhancement

Hybrid Micro-Nano Structured Thermal Interfaces for Pool Boiling Heat Transfer Enhancement

Enhancement of Metal Boiling Heat Transfer Performance on Micro-Nano Structure Surface Prepared by Femtosecond Laser

Composite porous surfaces of microcavities for enhancing boiling heat transfer

Experimental Study on the Flow Boiling (Two-Phase) Heat Transfer of High-Density Micro-/Nano-Porous Copper-Alumina-Copper Nano-composite-Coated Surfaces

Enhanced pool boiling heat transfer characteristics on microstructured copper surfaces coated with hybrid nanofluid

Molecular dynamics investigation of the effect of nanostructured surfaces on flow boiling

Enhanced pool boiling heat transfer by metallic nanoporous surfaces under low pressure

Ultrascalable Three-Tier Hierarchical Nanoengineered Surfaces for Optimized Boiling