Abstract:In previous studies, it was found that there exists a minimum flame spread rate under a certain range of sample widths for steady burning horizontal flame spread. While this was hypothesized to occur due to a transition between convectively-dominated to radiation-dominated flame spread, no measurements were performed to quantify this process. This paper presents a detailed experimental study investigating sample width and thickness effects on steady horizontal flame spread, including detailed measurements of the components of radiation, convection, and conduction. Water-cooled heat flux gauges, R-type micro-thermocouples traversed through the gas phase, and K-type thermocouples embedded in the solid phase were all used to deduce these heat transfer components. Results show that convective heat transfer decreases with increasing sample width as the shape of the flame front is on average farther from the fuel surface, while radiation increases as the view factor from the fire to unignited fuel increases with larger sample size. Conduction measured within the fuel sample is, as expected, confirmed to be negligible. Comparing a combination of these components, the total heat flux first decreases as the competition between radiation and convection changes, followed by steadily increasing heat fluxes as the width of the sample increases. Heat feedback also influences the sample pyrolysis rate, so there was a coupled response following this trend. The apparent dip followed by an increase in total heat flux can now explain why a period of minimum flame spread rate exists. Modification of an existing theory also matches experimental results very closely. Finally, a dimensionless heat-release rate for different sample configurations is used to scale the dimensionless flame heights with a power-law correlation having exponents 0.39 for Q* >1 and 0.6 for Q* <1, closely resembling the 2/5 and 2/3 predicted by Zukoski's model.

Effects of Width and Incline Angle on Combustion and Heat Transfer Characteristics of Poly(methyl methacrylate)

Effects of Ceiling Inclination on Lateral Flame Spread over Vertical Poly(methyl Methacrylate) Surface

Experimental Study on Flame Spread over Inclined PMMA and PE Slabs

Effect of Trimethylolpropane Triacrylate Cross-Linkages on the Thermal Stability and Char Yield of Poly (methyl Methacrylate) Nanocomposites

Combustion Characteristics of PMMA Sheets with Different Equivalent Diameters in Still Air

Experimental Study on Coupled Combustion of PMMA Counter-directional Flame Spread in the Horizontal Direction

Effect of Incline Angle on Surface Flame Spread of Polypropylene

Width Effects on Downward Flame Spread over Poly(methyl Methacrylate) Sheets

Effectsof Equivalent Diameter on Verticalpmmacombustion in Natural Convection Environment

Upward Flame Spread over an Array of Discrete Thermally-Thin PMMA Plates

EXPERIMENTAL STUDY ON CHARACTERISTICS OF FLAME SPREAD OVER THE SURFACE OF WOOD SHEETS WITH DIFFERENT WIDTH UNDER DIFFERENT INCLINED ANGLE

Heat Transfer Blockage Effect of Small-Scale PMMA Flame under Exterior Heat Radiation

Sample Width and Thickness Effects on Upward Flame Spread over PMMA Surface.

Effects of Backwall on Inner Thermal Structure in Opposed-Flow Horizontal Flame Spread of Thick PMMA Panel

Effect of finite dimension on downward flame spread over PMMA slabs: Experimental and theoretical study

Experimental, analytical and numerical investigation on auto-ignition of thermally intermediate PMMA imposed to linear time-increasing heat flux

Prediction of Three-Dimensional Downward Flame Spread Characteristics over Poly(methyl Methacrylate) Slabs in Different Pressure Environments

Fire Spread over Charring Materials: Influence of the Sample Orientation and External Radiant Intensity

Experimental Study of Flame Spread over Thermally-Thin Inclined Fuel Surface and Controlling Heat Transfer Mechanism under Concurrent Wind

Heat flux and flame spread rate of discrete PMMA in concave building facade with window intervals

Experimental And Numerical Study On Effect Of Sample Orientation On Auto-Ignition And Piloted Ignition Of Poly(Methyl Methacrylate)