Abstract:Flames propagating along the sample edges (edge flame) will transform two-dimensional flame spread into three-dimensional flame spread, causing a significant interference with results of material flammability test. A potential method to minimize above effect is utilizing an inert wall to inhibit the side surface of sample with a designed air gap distance. In this work, the downward flame spread along the sample edge with various air gap distances is systematically studied. Cast PMMA with thicknesses from 0.4 to 2.5 mm were used as samples. The general trend of flame spread rate (FSR) at edge with respect to air gap distance can be summarized into three regimes: when the air gap distance is less than 2 mm, the edge flame is quenched by wall heat loss, and the overall flame spread behavior is two-dimensional. Then, the edge flame appears after the air gap distance exceeds 2 mm, resulting in a sharp increase in FSR. This critical air gap distance for the onset of edge flame is less sensitive to the sample thickness. Finally, as the air gap distance continues to increase, the FSR gradually approaches the asymptotic value of the uninhibited sample. With the increase in air gap distance, thermally-thin assumption loses validity as a result of the reduction in residence time of solid phase (larger FSR). To interpret the general trend of FSR with respect to air gap distance, a modified flame spread model based on conventional thermal theory is developed. The effect of air gap distance on flame spread along sample edge is characterized by two correction factors, one of which describes solid surface curvature at sample edge, the other of which is the effective flame temperature considering the heat loss from the spreading flame to the metal wall. The new model well reproduces the experimental results, and further supports the significance of heat loss in the trend of flame spread rate. This work helps to understand the flame spread mechanism under effects of solid surface curvature and heat loss, while also providing scientific support for optimization of material flammability testing standards.

Heat Transfer Blockage Effect of Small-Scale PMMA Flame under Exterior Heat Radiation

Experimental Study on Radiation Blockage of Small-Scale Vertical PMMA Fires

Experimental Study on Heat Transfer Blockage in Small Scale Flames

Radiation blockage in small scale PMMA combustion

Heat Transfer Blockage in Small Scale Combustion of Polymers

Experimental Study on Coupled Combustion of PMMA Counter-directional Flame Spread in the Horizontal Direction

Wind Aided Fuel Burning Rate under External Radiation: Heat and Mass Transfer Analysis

Heat flux and flame spread rate of discrete PMMA in concave building facade with window intervals

Effect of unheated length on heat transfer in a vertically solid burning

Experimental and numerical study of PMMA combustion in counterflow configuration

Effects of Overlap Length on Flammability and Fire Hazard of Vertical Polymethyl Methacrylate (PMMA) Plate Array

Fire Spread over Charring Materials: Influence of the Sample Orientation and External Radiant Intensity

Experimental Study of Upward Flame Spread Behaviors over Thermally Thick Vertical PMMA of Various Sample Widths under Normal Wind

Effect of solid surface curvature and wall heat loss on the downward flame spread along the edge of thin PMMA sheets

On the orientation effect on the flame spread over discrete fuel using a mass-transfer number

Effect of ceiling height on flame spread over horizontal poly(methyl methacrylate) slabs in corridor

Experimental study on influence of air gap on upward flame spread over discrete fuel

Burning process over a thermally thick material with varying unheated lengths under forced airflow

Effects of Combined Surface and In-Depth Absorption on Ignition of PMMA.

Heat and Mass Transfer Mechanisms During Unsteady Flame Spread Process along Inclined Surface under Wind

Study on the influence of restricted distance on fixed-width discrete of discontinuous flame spread