Abstract:Emmons' solution does not include a development length in front of the flame, which causes the thermal and velocity boundary layers to have different starting locations. In this paper, the effect of the unheated starting segment on solid burning was first experimentally investigated over a horizontal 10 cm × 10 cm × 1.5 cm Poly (methyl methacrylate) sample under 0.75 m/s concurrent airflow with varying unheated lengths L0 (5, 10, 20 cm). The flow field, flame structure, and gas-phase temperature profile were experimentally recorded, and the subsequently produced flame standoff distance and dimensionless temperature gradient were combined to reveal the effect of the unheated segment on the boundary layer combustion. The parameters directly related to fire hazard, like heat transfer coefficient (burning rate), and mass loss rate were also measured and theoretically deduced, to obtain the effect of the unheated segment on wind-driven fire development. Results demonstrated that owing to the presence of the unheated segment, the pressure gradient is misaligned with the density gradient to be prone to produce vortices and form streaky flames. The streak structure distributed in the flame is associated with a stronger heat transfer, resulting in a larger convective heat transfer coefficient than the theoretical ones. Due to the viscous drag effect, with increasing unheated length, the flame standoff distance increases while the convective heat transfer coefficient decreases. Additionally, coupled effects of the unheated length and forced airflow, solid burning is a transient process. As time progresses, with the valley and vortex effect, the flame standoff distance increases and decreases in the leading and trailing section, respectively, and the differences in flame standoff distance and heat transfer coefficient for varying unheated lengths are enlarged. Eventually, the mass-loss rate has an increasing tendency accompanied by a decreasing burning contribution of the leading section.

Burning process over a thermally thick material with varying unheated lengths under forced airflow

Effect of unheated length on heat transfer in a vertically solid burning

Experimental study of the effect of unheated starting segment upon flame spread over solid fuel under forced airflow

Effect of unheated segment on heat transfer over a thermally thick material under forced flow

Horizontal solid burning under laminar forced convection and turbulent buoyant convection with an unheated segment

Wind Aided Fuel Burning Rate under External Radiation: Heat and Mass Transfer Analysis

Pyrolysis and Piloted Ignition of Thermally Thick PMMA Exposed to Constant Thermal Radiation in Cross Forced Airflow

Experimental, analytical and numerical investigation on auto-ignition of thermally intermediate PMMA imposed to linear time-increasing heat flux

Experimental and numerical study of PMMA combustion in counterflow configuration

Lateral Flame Spread over PMMA under Forced Air Flow

Experimental Study of Flame Spread over Thermally-Thin Inclined Fuel Surface and Controlling Heat Transfer Mechanism under Concurrent Wind

Burning Characteristics of PMMA with Varied Stretch Rates under Stagnation-Point Diffusion Flames

Flame spread over pmma in narrow channel

Effects of Backwall on Inner Thermal Structure in Opposed-Flow Horizontal Flame Spread of Thick PMMA Panel

Experimental Study of Upward Flame Spread Behaviors over Thermally Thick Vertical PMMA of Various Sample Widths under Normal Wind

Combustion Characteristics of PMMA Sheets with Different Equivalent Diameters in Still Air

Upward Flame Spread over an Array of Discrete Thermally-Thin PMMA Plates

Heat Transfer Blockage Effect of Small-Scale PMMA Flame under Exterior Heat Radiation

Sample Width and Thickness Effects on Upward Flame Spread over PMMA Surface.

Effects of Width and Incline Angle on Combustion and Heat Transfer Characteristics of Poly(methyl methacrylate)

Influences of Low Atmospheric Pressure on Downward Flame Spread over Thick Pmma Slabs at Different Altitudes