Abstract:A mixture fraction approach was applied to predict the combustion behavior of polymeric materials. In comparison to the combustion of gaseous mixtures, the presence of solid fuels complicates the description of the combustion. Accurate predictions of burning characteristics can only be achieved through the proper resolution of heat and mass transfer between the gas-phase flame and the solid fuel. We focused on a model case of flame spread over a solid fuel surface. Polymethyl methacrylate (PMMA) was selected as a polymeric material. An approach was proposed to account for heat loss from the gas phase to the solid material through calculations of counterflow diffusion flames with the flame positioned closely to the fuel supply. A combination of these solutions was applied to restore temperature and species mass fractions from tabulated chemistry. An analysis of the numerical results from previous studies on flame spread over PMMA, based on one-step combustion reaction and calculating the chemical source term at each time step, demonstrated a monotonic distribution of the mixture fraction in the flame region between the fuel and oxidizer streams. The shape of the flame tip was satisfactorily resolved using the proposed approach that employs a skeletal chemical mechanism for gas-phase combustion consisting of 29 species and 33 reactions. However, the heat flux from the flame to the solid fuel was overpredicted, resulting in higher flame spread rates compared to experimental data and previous calculations. Preliminary results show a promising opportunity for the mixture fraction approach to describe the combustion behavior of polymers. An analysis showed that oversimplifying the heat transfer process in the flame tip area is a main source of prediction inaccuracies. Multidimensional heat transfer has to be properly incorporated into a tabulated chemistry approach. Several potential directions for future work have been outlined.

Experimental Study on Heat Transfer Blockage in Small Scale Flames

Heat Transfer Blockage in Small Scale Combustion of Polymers

Heat Transfer Blockage Effect of Small-Scale PMMA Flame under Exterior Heat Radiation

Radiation blockage in small scale PMMA combustion

Experimental Study on Radiation Blockage of Small-Scale Vertical PMMA Fires

Upward Flame Spread over an Array of Discrete Thermally-Thin PMMA Plates

An Experimental and Numerical Study on Fire Behaviors of Charring Materials Frequently Used in Buildings

Experimental study on influence of air gap on upward flame spread over discrete fuel

Experimental Study on Coupled Combustion of PMMA Counter-directional Flame Spread in the Horizontal Direction

A Mixture Fraction Approach to Predict Polymer Burning

Effects of Backwall on Inner Thermal Structure in Opposed-Flow Horizontal Flame Spread of Thick PMMA Panel

Experimental Research on Radiation Blockage of the Fuel Vapor and Flame in Pool Fires

Experimental, analytical and numerical investigation on auto-ignition of thermally intermediate PMMA imposed to linear time-increasing heat flux

An Experimental Study of the Rate of Gas Temperature Rise in Enclosure Fires

Experimental and numerical study of PMMA combustion in counterflow configuration

Flame spread over pmma in narrow channel

Experimental Study of Flame Spread over Thermally-Thin Inclined Fuel Surface and Controlling Heat Transfer Mechanism under Concurrent Wind

Upward Flame Spread over Discrete Thick Fuels under Mixed Convection Flow

Experimental Investigation of Downward Flame Spread over RPU Samples

Sample Width and Thickness Effects on Upward Flame Spread over PMMA Surface.

Combustion Characteristics of PMMA Sheets with Different Equivalent Diameters in Still Air