Abstract:There are two kinds of gasifier, the fixed bed and fluidized bed. The latter is paid much attention because of its advantages as a high intensity of gasification, a well-distributed temperature, easy controlling and the capacity for continuous and large-scale productions. So it is a matter of primary importance to simulate the chemical and physics phenomena in the fluidized bed gasifier by the dynamic model. The substance of building kinetic model is to write a set of dynamic equations that fit one kind of fluidized bed gasifier, and to confirm the dynamic parameters In it. Through the kinetic modeling study of gasification in the fluidized bed gasifier, we can not only get some reference data for designing the gasifier, but also predict the trend of some important variables such as the heat value, the quantity of product gas, the components of product gas and the efficiency of energy transformation.The researchers classify the fluidized bed gasifiers by the fluidized velocity of liquid or gas. For different fluidized bed gasifiers, different researchers have built a lot of dynamic models. Though the kinetic equations and the parameters used in the models are different, the methods to resolve the questions have a common ground. Firstly, by considering the geometrical structure of gasifier and analyzing its symmetrical degree, the dimension of the model can be decided. Then, the phases of materials in the gasifier are also considered and several important hypotheses are made. Lastly, as they are difficult to simulate and have less importance the complicated terms are neglected. The governing equations and the hypotheses compose the mathematical model of biomass gasification kinetics. After confirming the boundary conditions and the initial values, one result can be obtained. Then the result is compared with the experimental data and the degree of satisfactory agreement indicates whether the model is right and whether the hypotheses are reasonable.Currently, many kinetic models, each of which has a distinct standpoint, have been established for different fluid beds. But none of these models has been recognized because there are not enough experimental data to confirm them. Further validation is required. We classify and summarize the kinetic models that exist currently by the types of fluid beds, modeling hypotheses, etc. Although the predicted values of existed models tally with experimental data well. the models have many shortages. Advanced research can be proceeded with in several ways: (1) Model should be adjusted to apply in more gasifiers. (2) Because the virtual diameter of bubble cannot be calculated, calculation of non-linear chemistry can be taken into account based on the formula of diameter transformation of ideal bubble. (3) The values of several parameters in different conditions should be confirmed. (4) The factor of high pressure can be added into the model, and more experimental data to prove the validity of model is needed.

Modeling Of Biomass Gasification To Syngas

Process Simulation, Thermodynamic and System Optimization for the Low-Carbon Alcohols Production Via Gasification of Second-Generation Biomass

Simulation of Biomass Gasification and Application in Pilot Plant

Thermodynamic simulation of methanol synthesis from biomass-derived syngas

Electrolysis-boosted substitute natural gas from biomass: Kinetic modeling of fluidized bed gasification and system integration

Gasoline Synthesis from Biomass-Derived Syngas Comparing Different Methanol and Dimethyl Ether Pathways by Process Simulation, Based on the Bioliq Process

Modelling the biomass updraft gasification process using the combination of a pyrolysis kinetic model and a thermodynamic equilibrium model

Modelling of Biomass Gasification Through Quasi-Equilibrium Process Simulation and Artificial Neural Networks

Effects of operating conditions and reactor structure on biomass entrained-flow gasification

Modeling ethanol production through gas fermentation: a biothermodynamics and mass transfer-based hybrid model for microbial growth in a large-scale bubble column bioreactor

Thermodynamic Analysis of Fischer-Tropsch Fuels from Biomass

Optimization of the Three-Stage Biomass Gasification Characteristics in High-Temperature Entrained-Flow Bed

Thermodynamic modeling modification and experimental validation of entrained-flow gasification of biomass

A detailed process model of biomass gasification in bubbling fluidized bed: integration of hydrodynamics into reaction modeling

Effects of CO2 and CH2 Adding on Steam Gasification of Biomass Renewable Energy for Syngas Production Considering Parametric Investigation

Synthetic fuels and chemicals production from biomass synthesis gas

An Experimental And Response-Surface-Based Optimization Approach Towards Production Of Producer Gas In A Circulating Fluidized Bed Gasifier Using Blends Of Renewable Fibre-Based Biomass Mixtures

High value-added syngas production by supercritical water gasification of biomass: Optimal reactor design

Optimizing Hydrogen-Rich Biofuel Production: Syngas Generation from Wood Chips and Corn Cobs

An Important Topic In Biomass Clean Energy: Dynamic Models Of Fluidized Beds

Non-premixed Combustion Model of Fluidized Bed Biomass Gasifier for Hydrogen-Rich Gas