Simulation of Biomass Gasification and Application in Pilot Plant

Tao He,Dezhi Han,Jingli Wu,Jianqing Li,Zhiqi Wang,Jinhu Wu
DOI: https://doi.org/10.1002/ente.201402134
IF: 4.149
2015-01-12
Energy Technology
Abstract:In the present work, a revised equilibrium model (gas–solid) was built. The temperature approach to equilibrium for the methane cracking reaction was specified to improve the prediction accuracy. The model was applied and validated in pilot scale experiments using a 150 kg h−1 two‐stage downdraft gasifier and a gasifier from the Energy Research Centre of the Netherlands (ECN). The type of gasification agent is a dominant factor that determines product gas composition, quality, and end‐use. A theoretical analysis of the effect of gasifying agent on product gas quality and process efficiency was executed based on the model calculation. The optimal operation conditions were established for the three (air, steam, oxygen–steam) gasification processes. For air gasification, an optimal value of equivalence ratio (ER) of 0.31 corresponds to the maximum gasification efficiency. The optimal range of steam/carbon ratio (SR) is between 0.7 and 0.8 for the equilibrium of the water–gas shift and steam reforming reactions. For autothermal oxygen–steam gasification, the H2 concentration reaches the highest value for SR=1.0. Submitting the application: A revised thermodynamic equilibrium method which has a good validity and applicability for biomass gasification is validated by using a pilot experiment. Three gasification processes are studied systematically based on this, which can provide a useful theoretical estimation for the development of more efficient biomass gasification processes, or those producing Bio‐H2.
energy & fuels
What problem does this paper attempt to address?