Abstract:Biomass is a green source of power since it has minimal to no impact on biodiversity and offers global security for ecological sustainability. Gasification is a thermochemical procedure that turns a source into a by-product (fuel gas). Biomass has an edge over carbon fuels because it is sustainable. It acts as a steady source of feedstock and works as a viable candidate for energy production because it is sustainable. A few other negative repercussions of their extraordinary use include the persistent unpredictability of demand and supply for fossil fuels, environmental harm, and the consequences of climate change. Different factors, such as temperature, particle size, biomass composition, gasifier design, operating conditions, etc., have an impact on a biomass gasifier's efficiency. During gasification, a number of simultaneous reactions actually happen, and some components can serve as both reactants and products. We are reporting for the first time the optimization of biomass mixture (sugarcane bagasse and sawdust) along with equivalence ratio and air flow rate. Preliminary experiments were conducted to ascertain the range and levels of operations of three factors, such as equivalence ratio (ER), air flow rate, and biomass ratio. Optimization involving Box-Behnken design was utilised to decipher the effect of three influencing parameters such as biomass mixture of sugarcane bagasse and sawdust (25%, 50%, and 75%); low air flowrates (10.5, 13.0, and 16.5 L/hr) and equivalency ratios (0.2, 0.3, and 0.4) on gas yield, tar yield, and gas heating value of biomass using an Intrinsic circulating fluidized-bed reactor. All stochastic parameters validated our model. An optimal gas yield, tar yield, and gas heating value of 1.881 Nm3/Kg, 11.360, and 8.188 were predicted at an equivalence ratio (ER) of 0.3, air flow rate of 16.5 L/h, and biomass ratio of 0.75 (75% sugarcane bagasse to 25% sawdust ratio) at a desirability of 1.00. The experimental values were found to be: gas yield (1.867 Nm3/Kg), tar yield (14.0 g/Nm3), and gas heating value (8.15 MJ/Nm3). Trialswere conducted in-order to warrant the predicted circumstancesand the results were found to be correlated with experimental values. Keywords Gasification, gas yield, tar yield, gas heating value, biomass combination.

Effects of CO2 and CH2 Adding on Steam Gasification of Biomass Renewable Energy for Syngas Production Considering Parametric Investigation

Effects of operating conditions and reactor structure on biomass entrained-flow gasification

Gasification Characteristics Of Biomass In Different Ambiences

Effect of Air Equivalence Ratio on the Characteristics of Biomass Partial Gasification for Syngas and Biochar Co-Production in the Fluidized Bed

Numerical investigation of different biomass feedstock on syngas production using steam gasification and thermodynamic analysis

Investigation on Synergism and Its Influence Parameters between Coal and Biomass during Co-Gasification Based on Aspen Plus

Optimizing Hydrogen-Rich Biofuel Production: Syngas Generation from Wood Chips and Corn Cobs

Simulation of air-steam gasification of pine sawdust in an updraft gasification system for production of hydrogen-rich producer gas

Modeling Of Biomass Gasification To Syngas

Syngas Production from CO 2 /CH 4 Rich Combustion in a Porous Media Burner: Experimental Characterization and Elementary Reaction Model

Syngas Composition: Gasification of Wood Pellet with Water Steam through a Reactor with Continuous Biomass Feed System

Numerical and experimental assessment of parametric effect on steam-carbon dioxide co-gasification of sewage sludge and coal in an updraft reactor

SYNGAS PRODUCTION WITH BIOMASS ENTRAINED FLOW GASIFICAITON

Performance Investigation of Biomass Gasification for Syngas and Hydrogen Production Using Aspen Plus

The Effects of Syngas Composition on Engine Thermal Balance in a Biomass Powered CHP Unit: A 3D CFD Study

Effects of CO 2 Dilution and CH 4 Addition on Laminar Burning Velocities of Syngas at Elevated Pressures: An Experimental and Modeling Study

Effects of CO2 Dilution and CH4 Addition on Laminar Burning Velocities of Syngas at Elevated Pressures: an Experimental and Modeling Study

Thermodynamic modeling modification and experimental validation of entrained-flow gasification of biomass

An Experimental And Response-Surface-Based Optimization Approach Towards Production Of Producer Gas In A Circulating Fluidized Bed Gasifier Using Blends Of Renewable Fibre-Based Biomass Mixtures

Biomass gasification with CO2 in a fluidized bed

Effect of steam and equivalence ration (ER) on products of biomass gasification