Abstract:Sorption enhanced steam gasification of biomass (SESGB) presents a promising approach for producing high-purity H2 with potential for zero or negative carbon emissions. This study investigated the effects of gasification temperature, CaO to carbon in biomass molar ratio [CaO/C], and steam flow on the SESGB process, employing carbide slag (CS) and its modifications, CSSi2 (mass ratio of CS to SiO2 is 98:2) and CSCG5 (mass ratio of CS to coal gangue (CG) is 95:5), as CaO-based sorbents. The investigation included non-isothermal and isothermal gasification experiments and kinetic analyses using corn cob (CC) in a macro-weight thermogravimetric setup, alongside a fixed-bed pyrolysis-gasification system to assess operational parameter effects on gas product. The results suggested that CO2 capture by CaO reduced the mass loss during the main gasification as the [CaO/C] increased. The appropriate temperature for SESGB process should be selected between 550 and 700 °C at atmospheric pressure. The appropriate amount of sorbent or steam could facilitate the gasification reaction, but excessive addition led to adverse effects. Operational parameters influenced the apparent activation energy (Ea) by affecting various gasification reactions. For each test, Ea at the char gasification stage was significantly higher than that at the rapid pyrolysis stage. The addition of CS notably increased H2 concentration and yield, while sharply reducing CO2 levels. H2 concentration initially rose and then fell with greater steam flow, peaking at 76.11 vol% for a steam flow of 1.0 g/min. H2 yield peaked at 298 mL/g biomass with a steam flow of 1.5 g/min, a gasification temperature of 600 °C and a [CaO/C] of 1.0. Increasing gasification temperature remarkably boosted the H2 and CO2 yields. Optimal conditions for the SESGB using CS as a sorbent, determined via response surface methodology (RSM), include a gasification temperature of 666 °C, a [CaO/C] of 1.99, and a steam flow of 0.5 g/min, under which H2 and CO2 yields were 464 and 48 mL/g biomass, respectively. CSSi2 and CSCG5 demonstrated excellent cyclic H2 production stability, maintaining H2 yields around 440 mL/g biomass and low CO2 yields (∼60 mL/g biomass) across five cycles. The study results offer new insights for the high-value utilization of agroforestry biomass and the reduction and resource utilization of industrial waste.

Simulation of air-steam gasification of pine sawdust in an updraft gasification system for production of hydrogen-rich producer gas

Numerical simulation analysis of biomass gasification and rich-H2 production process in a downdraft gasifier

Simulation of sorption enhanced staged gasification of biomass for hydrogen production in the presence of calcium oxide

Performance Investigation of Biomass Gasification for Syngas and Hydrogen Production Using Aspen Plus

Optimizing Hydrogen-Rich Biofuel Production: Syngas Generation from Wood Chips and Corn Cobs

A detailed process model of biomass gasification in bubbling fluidized bed: integration of hydrodynamics into reaction modeling

Gasification of biomass using oxygen-enriched air as gasification agent: a simulation study

Maximizing hydrogen-rich syngas production from rubber wood biomass in an updraft fluidized bed gasifier: An advanced 3D simulation study

Hydrogen production via gasification of corn stover: modeling and simulation using Aspen Plus®

Advancing hydrogen generation: Kinetic insights and process refinement for sorption-enhanced steam gasification of biomass utilizing waste carbide slag

Non-premixed Combustion Model of Fluidized Bed Biomass Gasifier for Hydrogen-Rich Gas

Study on the Simulation of Source-Separated Combustible Solid Waste Fluidized Bed Gasification Based on Aspen Plus

Hydrogen production via integrated configuration of steam gasification process of biomass and water‐gas shift reaction: Process simulation and optimization

Research of Characteristics Biomass Staged-Gasification for Hydrogen-Rich Syngas

Application of the Aspen Plus Software Package for Simulation of the Synthesis-Gas Composition in Oxygen-Free Steam Gasification of Biomass

Co-gasification of biomass and polyethylene: a simulation study by considering tar formation

Effects of CO2 and CH2 Adding on Steam Gasification of Biomass Renewable Energy for Syngas Production Considering Parametric Investigation

Investigation of hydrogen-rich syngas production from biomass gasification with CaO and steam based on real-time gas release behaviors

Two-stage gasification process simulation and optimization of pulverized coal for hydrogen-rich production using Aspen plus

Simulation of Municipal Solid Waste Gasification for Syngas Production in Fixed Bed Reactors

CaO-based sorption-enhanced steam gasification of biomass for high purity H2 production: a modeling approach