Abstract:The Microarc Oxidation (MAO) layer on titanium alloy was mainly composed of TiO2, and there were some defects, such as holes and cracks, which made the performance of the MAO layer not ideal. To enhance the properties of the MAO layer, titanium carbide (TiC) particles were added to the electrolyte of a phosphate–silicate system as an additive. Consequently, the MAO layers containing the TiC phase on Ti6Al4V alloy were produced. The MAO process, composition, microstructure, and hardness of the MAO layer were comprehensively analyzed. Their frictional performance was assessed under reciprocating friction conditions without lubrication. The findings suggested that added TiC particles in the electrolyte played a significant role in creating the MAO layer, enhancing its thickness. The electrolyte without TiC particles produced an MAO layer primarily composed of TiO2 in two different mineral forms (rutile and anatase). Adding TiC particles resulted in the presence of TiC within the MAO layer, thereby facilitating the formation of a reinforced oxide layer. This addition also led to an improvement in the densification of the layer and a reduction in porosity. Notably, corrosion resistance testing indicated that incorporating 6 g/L TiC into the electrolyte resulted in superior performance compared with that obtained from the base electrolyte alone by achieving 1.4 times higher corrosion resistance. Moreover, a hardness value of 690 HV for the MAO layer was attained at a content level of 9 g/L TiC, demonstrating a significant 65% enhancement compared to the base oxide layer. This finding also demonstrated significantly enhanced friction property with a wear-volume reduction to 0.81 mm3. The findings on the relationship between the preparation of the MAO layer and its structure and properties can provide valuable guidance for designing and preparing the MAO layer.

Physicochemical properties and surface topography of micro-arc oxidation coating on titanium alloy

Preparation and properties of micro-arc oxidation coating on Ti75 titanium alloy

Characterization of Microarc Oxidation Coatings on Pure Titanium

Characteristic and in vitro bioactivity of a microarc-oxidized TiO2-based coating after chemical treatment

Characteristic of Microarc Oxidized Coatings on Titanium Alloy Formed in Electrolytes Containing Aluminate and Zro2 Particles

Preparation and Corrosion Behaviour of Micro-Arc Oxidation Coating on Ti6Al4V Alloy

Structure and Mechanical Properties of MAO Coatings Formed on Aluminum-Coated Titanium Alloy

Analysis of titanium surface treated with combination of sandblast-acid etching and microarc oxidation

Preparation and properties of titanium oxide film on NiTi alloy by micro-arc oxidation

Preparation of Micro-Arc Oxidation Coating on TC11 Titanium Alloy and Study on Its Microstructure and Performance

Nanoindentation of Microarc Oxidation Coatings on Pure Titanium

Effect of Pulse Duty Cycle and Oxidation Time on Microstructure and Properties of Micro-arc Oxidation Coatings on Ti6Al4V Alloy

Microarc Oxidation of Titanium Alloy to Ca-and P-Containing Gradient Biocoatings

Characterization and Properties of Microarc Oxidized Coatings Containing Si, Ca and Na on Titanium

Preparation, characterization and mechanical properties of microarc oxidation coating formed on titanium in Al(OH) 3 colloidal solution

Microarc Oxidation Coating and High-Temperature Oxidation Resistant Property on Ti Alloy

Microarc Oxidation of Titanium Alloy to Ca- and P-Containing Gradient Biocoatings

Growth, Microstructure and Mechanical Properties of Microarc Oxidation Coatings on Titanium Alloy in Phosphate-Containing Solution

Influence of titanium carbide particles on the characteristics of microarc oxidation layer on Ti6Al4V alloy

Effect of the change of Ca/P concentration on the mechanical properties of Ti-Alloy micro-arc oxidation coating

Characteristic of microarc oxidized coatings on titanium alloy formed in electrolytes containing chelate complex and nano-HA