Finite Element Analysis for the Influence of Curvature Angle ψ of the Outside Corner on ECAE of Pure Aluminum

Ju WU,Guo-quan XIANG,Xian-hua CHENG

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2005.07.008

2005-01-01

Abstract:The equal channel angular extrusion(ECAE) process of pure aluminum was simulated with finite element method. The influence of the curvature angle ψ of the outside corner on the extrusion load and the deformation uniformity was discussed. The results indicate that the horizontal component of reaction force from the die wall increases with the angle ψ, which is helpful for the deformation of billet. Consequently the extrusion load decreases with angle ψ. The sliding frictional resistance on the shear deformation zone increase with angle ψ. Because of the arc of curvature (ψ), the lower part of billet is subjected to bending deformation, which results in the zone of non-uniform deformation. Therefore, the nonuniformity of the (equivalent) strain distribution increases with angle ψ.