Abstract:The electrically assisted forming (EAF) technology can reduce the load & stress and improve the formability of difficult-to-deform alloys due to its coupled thermal and athermal effects. To decouple the two effects and to elucidate each mechanism for deeply understanding and optimizing the EAF processing, we developed an electrothermalmechanical (ETM) macro-meso multiscale model by combing a modified Johnson-Cook (JC) constitutive model with the dislocation density based crystal plasticity finite element (DD-CPFE). The modified JC was used to describe the macroscopic electro-assisted deformation, while the meso-scale DD-CPFE was used to deal with the thermal and athermal effects on the slip rate. Statistically stored dislocations (SSDs) were introduced into the Orowan rate equation to explain the thermal effect part, and the athermal part was reflected through the effect of free energy change on the dislocation motion in the rate equation, due to the collision between free electrons and metallic ions. The simulated results show that the equivalent stress, strain, and dislocation densities are distributed heterogeneously in a meso-scale and sensitive to the current density. Local thermal effect due to geometrically necessary dislocations (GND) exerts no effect on the temperature gradient because of rapid heat conduction between grains. The thermal effect is dominated by the thermal expansion obviously reducing the flow stress in the single-phase and two-phase fields (0 to 70 A/mm 2 ), while the athermal effect is effective in the two-phase field (corresponding to the current density range of 0 to 20 A/mm 2 ) in reducing the flow stress, which is reasonably explained by the change of bonding strength in defect zones, such as grain boundaries, of the HCP structure via the first principle calculations.

3D finite element simulation of deformation behavior of CP-Ti and working load during multi-pass equal channel angular extrusion

Finite element analysis of temperature rise in CP–Ti during equal channel angular extrusion

Modeling and Experimental Observation of the Plastic Anisotropy and Damage of CP-Ti during Multi-Pass ECAE

Finite Element Modeling the Effect of Pressing Temperature and Temperature Rise on ECAE Process of CP-Ti

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

Tensile and Compressive Deformation Behaviors of Commercially Pure Al Processed by Equal-Channel Angular Pressing with Different Dies

Finite Element Analysis for Multi-pass Equal Channel Angular Pressing

3D FEM Simulation of Multipass ECAP Ti-50.8%Ni at Various Temperatures

Finite Element Simulation of Equal Channel Angular Pressing of Ti-6Al-4V Alloy

Finite Element Analysis of Influence of Friction Coefficient on Equal Channel Angular Extrusion of Titanium Alloy

Three Dimensional Finite Element Analysis of Ti-6Al-4V Alloy During Equal Channel Angular Pressing

Numerical Simulation of Semi-Solid Billet Preparation by Equal Channel Angular Extrusion

Finite Element Simulation of Extrusion Process of TC4 Titanium Alloy Profile

Super-Elasticity Characteristics of TiNi Alloy Processed by Equal Channel Angular Extrusion

Electrical-thermal-mechanical coupled modeling and simulation on deformation behaviors of Ti6554 alloy in electrically-assisted micro-tension

Equal channel angular extrusion of NiTi shape memory alloy tube

Numerical Simulation of Equal-Channel Angular Pressing of Commercial Pure Aluminum

Finite element analysis of the equivalent strain distribution of ZK60 alloy during cyclic extrusion and compression

Simulation And Experimental Investigation For The Homogeneity Of Ti49.2ni50.8 Alloy Processed By Equal Channel Angular Pressing

Severe plastic deformation of commercially pure aluminum using novel equal channel angular expansion extrusion with spherical cavity

Impact of Equal Channel Angular Pressing on Mechanical Behavior and Corrosion Resistance of Hot-Rolled Ti-2Fe-0.1B Alloy