Abstract:In this research, the earing characteristics of 6K21 aluminum alloy in circular cup deep drawing are investigated by virtue of experiments and multi-scale simulations including anisotropic Drucker, Hill48, Yld91 yield functions and crystal plastic finite element model (CPFEM). First, the deep drawing experiments of AA 6K21 are carried out to explore the influences of blank holding force (BHF) and blank diameter (BD) on earing profile and mechanical response. The user-defined material model subroutine is written for LS-DYNA explicit code, including constitutive model and ductile fracture criterion under associated or non-associated flow rule (NAFR). The parameters of the crystal plasticity model are calibrated by means of an optimization algorithm. Three yield functions under NAFR and CPFEM are used to predict earing in deep drawing simulation. The effects of five textures on the earing profiles and thickness variables are studied by CPFEM. The results demonstrate that the earing rate decreases slightly as the BHF increases. However, the mechanical response changes insignificantly. Moreover, as the BD increases, both the earing rate and mechanical response increase significantly. Considering computation accuracy and efficiency, the anisotropic Drucker function can accurately character the plastic deformation behavior of deep drawing. For five textures in CPFEM, Cube and Goss textures produce four ears at 0o and 90o from the rolling direction. Brass and S textures form six ears at 0o and 55o . Copper texture fabricates eight ears at 40o and 70o . The influences of five textures on earing rate are Goss > Cube > Copper > Brass > S. Furthermore, there are obvious thickness gradient fluctuations at the corner of the cup in Cube, Goss and Copper textures. It is expected to reduce the earing rate and improve the formability through reasonable allocations of experimental parameters and texture proportions.

Simulation of CuE Copper Alloy in a Closed-Die Multi-Axial Forging Tool

3D FEM simulation of multi-stage forging process using solid modeling of forging tools

Numerical simulation for isothermal forging of cup-shaped component of 6A02 Aluminum alloy

Finite element simulation of isothermal forging of complex component using constitutive relationship of 7A04 alloy

STUDY ON THE NUMERICAL SIMULATION OF MULTI-STAGE ROTARY FORGING OF A NON-AXISYMMETRIC PART AND THE CAE ANALYSIS OF THE DIE STRENGTH

3 D FEM Simulation of the Cross-Shaft Multi-Stage Forging Processes

FEM simulation and optimization on rotating extrusion of bi-metal rod with constant shear friction

Experimental Study and Numerical Simulation of Isothermal Closed Die Forging for Aluminium Alloy Rotor

Research on the stress and strain evolution of aluminum alloy hot forging die

Prediction of Deformation Behavior and Microstructure Evolution in Heavy Forging by FEM

3D finite element simulation of deformation behavior of CP-Ti and working load during multi-pass equal channel angular extrusion

FEM simulation of forging of Ti alloy

Numerical simulation and experimental validation of microstructure evolution during the upsetting process of a large size martensitic stainless steel forging

Finite Element Simulation of Aluminum Alloy Cross Valve Forming by Multi-Way Loading

Technological simulation of the process of hot forging of two-layer forgings with deep cavities and an inverted cone

Process Design Based on Fe Simulations and Experiments of Forging A Complex-Shaped Magnesium Alloy Adaptor

Multi-scale numerical investigation of deep drawing of 6K21 aluminum alloy by crystal plasticity and a stress-invariant based anisotropic yield function under non-associated flow rule

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts

Numerical Simulation of Isothermal Forging Process of MB26 Magnesium Alloy

Numerical Simulation of Chamfering and Rounding Process of Heavy Forgings under Different Anvils

Forging process and FEM optimization for forged knuckles of railway wagons