Abstract:In order to provide a “standard” and transferable solution to metal extrusion industry, commercial finite element (FE) codes are used to model the highly non-linear deformation process. This paper focuses on evaluating two commercial FEA codes (Deform3D® & HyperXtrude®) that currently represent the state-of-the art of the technology. This research aims at using finite element analysis (FEA) based simulation to study the effect of geometry on the performance of a porthole die for aluminum extrusion, in order to improve the life of tooling and quality of the final part. More specifically, a systematic evaluation approach is followed to compare the two codes. The comparison was based on a thermo-mechanical simulation that predicts: extrusion load, exit velocity, and exit temperature. A comparison of the accuracy of the prediction of each FEA code with the experimental counterparts was used to conduct the relative assessment and select the best code. Other criteria were also used. It was found that HyperXtrude® is an effective finite element simulator that can support the optimization of process parameters such as ram speed, initial billet temperature, initial tooling temperature and bearing length to ensure balanced material flow in order to eliminate product defects. Deform3D®, on the other hand, is an effective tool that not only can be used to assess the quality of extrusion dies by accurately predicting stress in tooling components to adjust critical parameters such as the welding chamber height, mandrel teeth height, web shape and porthole angle in order to improve the die performance, but also be utilized to visualize and achieve a better understanding of the different forming stages during the extrusion process. In comparison to HyperXtrude®, Deform3D® code is not only capable of handling the flow analysis simulations but is also capable of handling tool deflection analysis for complex die geometries with multiple components of different materials, as it allows the user to mimic the real world scenarios of geometric gaps, press fit and die coating. After selecting Deform3D®, the latter was used to create a simulation model for our particular application, and the model was then further validated.

FEM Simulation of Aluminium Extrusion Through Two-Hole Multi-Step Pocket Dies

FEM-Assisted Design of a Multi-Hole Pocket Die to Extrude U-Shaped Aluminum Profiles with Different Wall Thicknesses

Effect of Pocket Design on Metal Flow Through Single-Bearing Extrusion Dies to Produce A Thin-Walled Aluminium Profile

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Numerical Simulation of Cavity-Filling Procedures for Micro-Pin-fin Array Thixoforming with Semi-Solid A356 Aluminium Alloy

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

FE Simulation of Extrusion to Produce a Thin-Walled Wide Profile Through a Spreading Pocket Die

Extrusion of 7075 Aluminium Alloy Through Double-Pocket Dies to Manufacture a Complex Profile

Finite Element Simulation and Analysis of Aluminum Alloy Three-Dimensional Milling

Trochoid-path-based FEM Simulation for High-Speed Milling of Aluminum Alloy

Evaluation of Finite Element Codes for the Simulation of Aluminum Extrusion Process

Analysis of milling forces in slot milling of aluminum alloy with three flutes cutter

Physical Simulation Method for the Investigation of Weld Seam Formation During the Extrusion of Aluminum Alloys

Application of Artificial Intelligence Extrusion Die Model Based on Finite Element Simulation in Decorative Material Aluminum Alloy

Innovative aluminium extrusion: increased productivity through simulation

FEM simulation and optimization on rotating extrusion of bi-metal rod with constant shear friction

Optimization of porthole extrusion die for 6063 aluminum alloy profile with thin-walled multi-cavity complex section and analysis of profile performance

Review of Numerical Simulation for Extrusion Process of Aluminum Alloy Profile

FEM Validation of Front End and Back End Defects Evolution in AA6063 and AA6082 Aluminum Alloys Profiles

Modeling and simulation of the flow drill screw process of a DP590/Al6061-T6 multi-material joint used for vehicle body

Development of multi-physics finite element model to investigate electromagnetic forming and simultaneous multi-point perforations of aluminium tube