Abstract:This article presents research results regarding the development of a new manufacturing technology for an element assigned to belt conveyor flights in the extractive industry through hot die forging (of a forging with a double-sided flange) instead of the currently realized process of producing such an element by welding two flanges onto a sleeve or one flange onto a flange forging. The studies were conducted to design an innovative and low-waste technology, mainly with the use of numerical modelling and simulations, partially based on the current technology of producing a flange forging. Additionally, during the development of the forging process, the aspect of robotization was considered, both in respect of the forging tools and the process of transportation and relocation of forging between the impressions and the forging aggregates. A thermo-mechanical model of the process of producing a belt conveyor flight forging with deformable tools was elaborated by means of the Forge 3NxT program. The results of the conducted numerical modelling made it possible, among other things, to develop models of forging tools ensuring the proper manner of material flow and filling of the impressions, as well as temperature and plastic deformation distributions in the forging and also the detection of possible forging defects. For the technology elaborated this way, the tools were built together with a special instrument for flanging in the metal, and technological tests were performed under industrial conditions. The produced forgings were verified through a measurement of the geometry, by way of 3D scanning, as well as the hardness, which definitively confirmed the properness of the developed technology. The obtained technological test results made it possible to confirm that the elaborated construction, as well as the tool impressions, ensure the possibility of implementing the designed technology with the use of robotization and automatization of the forging process.

Technological simulation of the process of hot forging of two-layer forgings with deep cavities and an inverted cone

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts

Simulation of Two-Stage Hot Forging of Porous Workpieces Involving Severe Plastic Deformation

Thermo-mechanical coupled simulation of hot stamping components for process design

3D FEM simulation of multi-stage forging process using solid modeling of forging tools

Preform design in axial hot closed die forging by isothermal surface method. Part 2. Application of isothermal surfaces method for complex shape forgings

Closed Die Forging Preform Shape Design Using Isothermal Surfaces Method

Comprehensive assessment of the production of a pipe billet with a flange by forging at various temperature conditions

Simulation of the Technological Process of Manufacturing Continuous Metal Products on a Casting and Forging Module with a New Modification

Development and Implementation of Die Forging Technology Eliminating Flange Welding Operations in Conveyor Driver Forging

Microstructural modeling and numerical simulation of multi-physical fields for martensitic stainless steel during hot forging process of turbine blade

Simulation of CuE Copper Alloy in a Closed-Die Multi-Axial Forging Tool

STUDY ON THE NUMERICAL SIMULATION OF MULTI-STAGE ROTARY FORGING OF A NON-AXISYMMETRIC PART AND THE CAE ANALYSIS OF THE DIE STRENGTH

Application of processing maps and numerical modelling for identification of parameters and limitations of hot forging process of 80MnSi8-6 steel

A Single Stage Hot Forging Process and Die Set of Alternator Poles

Simulation of Programmed Incremental Open-Die Forging Processes Based on Spread Coefficient and Geometric Transformation

System Analysis of Cold Axial Rotary Forging of Thin-Walled Tube Blanks

Experience of QFormDirect software implementation for preform impressions design in hot closed die forging

SIMULATION ANALYSIS OF WHEEL BEARING FORGING PROCESS BASED ON DEFORM

3 D FEM Simulation of the Cross-Shaft Multi-Stage Forging Processes

SIMULATION OF MULTI-STAGE COLD FORMING OF A THIN-WALLED VESSEL