Abstract:In response to the increasingly strict performance requirements of large molds, a novel Cr-Mo-V hot-work die steel has been developed. In order to study the high-temperature hot deformation behavior and plasticity of the novel steel, hot compression tests were conducted on the Gleeble-1500D thermal simulation testing machine at a deformation temperature of 950~1200 °C and a strain rate of 0.001~5 s−1. Based on the Arrhenius constitutive model, a novel Cr-Mo-V steel high-temperature constitutive model considering strain was established. The reliability and applicability of this modified model, which includes strain compensation, were assessed using the phase relationship coefficient (R) and the average absolute relative error (AARE). The values of R and AARE for comparing predicted outcomes with experimental data were 0.98902 and 3.21%, respectively, indicating that the model demonstrated high precision and reliability. Based on the Prasad criterion, a 3D hot processing map of the novel Cr-Mo-V steel was established, and the instability zone of the material was determined through the hot processing map: the deformation temperature (950~1050 °C) and strain rate (0.001~0.01 s−1) were prone to adiabatic shear and crystal mixing. The suitable processing range was determined based on the hot processing map: The first suitable processing area was the strain range of 0.05~0.35, the temperature range was 1100~1175 °C, and the strain rate was 0.001~0.009 s−1. The second suitable processing area was a strain of 0.45~0.65, a temperature of 1100~1200 °C, and a strain rate of 0.0024~0.33 s−1. Finally, the forging process of hundred-ton die steel forging was developed by combining 3D hot processing maps with finite element simulation, and the forging trial production of 183 t forging was carried out. The good forging quality indicated that the established hot processing map had a good guiding effect on the production of 100-ton test steel forging.

Application of processing maps and numerical modelling for identification of parameters and limitations of hot forging process of 80MnSi8-6 steel

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts

Hot Formability Study of Cr5 Alloy Steel by Integration of FEM and 3D Processing Maps

Coupled Thermo-Mechanical Analysis of the High-Speed Hot-Forging Process

Optimization of hot deformation parameters for multi-directional forging of Ti65 alloy based on the integration of processing maps and finite element method

Material driven workability simulation by FEM including 3D processing maps for magnesium alloy

Numerical simulation of radial precision forging technology for metal molybdenum

Study on High-Temperature Constitutive Model and Plasticity of the Novel Cr-Mo-V Hot-Work Die Steel Forging

Numerical Prediction on Microstructure Evolution for Multi-Stage Hot Forging of Micro-Alloyed Piston

Processing Maps and Prediction of Steady-State Hot Deformation Parameters for an As-Extruded 42crmo Steel

Microstructural modeling and numerical simulation of multi-physical fields for martensitic stainless steel during hot forging process of turbine blade

3D FEM simulation of multi-stage forging process using solid modeling of forging tools

3D Processing Maps of Cast Mg-8Gd-3Y Alloy at High Strain Rates and Their Application in Plane Strain Forging

Possibilities of Measuring and Detecting Defects of Forged Parts in Die Hot-Forging Processes

Sensitivity Analysis of Process Parameters for Developing an Improved Open Die Forging Process

Numerical Simulation and Physical Analysis for Dynamic Behaviors of P/M Tial Alloy in Hot-Packed Forging Process

42CrMo4 steel flow behavior characterization for high temperature closed dies hot forging in automotive components applications

Study of Hot Forming for High Strength Steel: Numerical Simulation-Static Explicit Algorithm

Hot Deformation Behaviour of Additively Manufactured 18Ni-300 Maraging Steel

Analysis of metal workability by integration of FEM and 3-D processing maps

Numerical and experimental analysis of the isothermal high temperature pneumoforming process