Abstract:We demonstrate herein a newly developed amperometric glucose biosensor by using multi-walled carbon nanotubes (MWCNTs) and zinc oxide (ZnO) nanorods composites film. The latter is generated by utilizing an electrostatic coordination approach under the assistance of the ultrasonic. The presence of ZnO nanorods in the composites enhances the abilities to electrocatalyze the oxidation of H2O2 and substantially raises the response current, which results in the composites exhibiting more efficiently electrocatalytic activity than those of MWCNTs and ZnO alone. As a result of the cross-linking reactions via glutaraldehyde, a layer of glucose oxidase (GOx) was firmly bound to the MWCNTs-ZnO film and an anti-interferent layer of poly (o-phenylenediamine) (PoPD) film was further electropolymerized on the enzyme film. At an applied potential of +0.8 V, the resulting biosensor performs a sensitive and selective electrochemical response to glucose in the presence of common interferences, such as ascorbic acid (AA) and uric acid (UA), with a linear dependence (R=0.997) on the glucose concentration in the range of 5.0x10(-6)similar to 5.0x10(-3) mol . L-1 and a detection limit of 3.5x10(-6) mol . L-1 at signal/noise=3. The response time was less than 10 s with addition of 5 mmol . L-1 glucose. The MWCNTs-ZnO/GOx/PoPD modified glassy carbon electrode presents stable, high sensitivity and also exhibits fast amperometric response to the detection of glucose, which is promising for the development of glucose sensor.

Carbon Nanotubes Modified Amperemetric Glucose Biosensor

A Pyrrole Quinoline Quinone Glucose Dehydrogenase Biosensor Based on Screen-Printed Carbon Paste Electrodes Modified by Carbon Nanotubes

Glucose biosensor based on multi-wall carbon nanotubes and screen printed carbon electrodes.

Amperometric Sensor Based on Ferrocene-Modified Multiwalled Carbon Nanotube Nanocomposites As Electron Mediator for the Determination of Glucose

Amperometric glucose biosensor based on boron-doped carbon nanotubes modified electrode.

Carbon Nanotubes-Based Glucose Biosensor Prepared Using Layer-by-layer Technique

Glucose biosensors based on nano-composites of multi-walled carbon nanotubes and zinc oxide nanorods

MWNTs Modified Glassy Carbon Biosensor for Glucose

Carbon Nanotubes Based Glucose Needle-type Biosensor

Electrochemical Biosensor Based on Multi-Walled Carbon Nanotubes and Au Nanoparticles Synthesized in Chitosan

Biocomposites of covalently linked glucose oxidase on carbon nanotubes for glucose biosensor

Amperometric glucose biosensor based on carbon nanotubes and platinum nanoparticle modified gold electrode

In situ chemo-synthesized multi-wall carbon nanotube-conductive polyaniline nanocomposites: characterization and application for a glucose amperometric biosensor.

Direct Electron Transfer: Electrochemical Glucose Biosensor Based on Hollow Pt Nanosphere Functionalized Multiwall Carbon Nanotubes

Functionalization of multi-walled carbon nanotubes with poly(amidoamine) dendrimer for mediator-free glucose biosensor

Integrating Cu/Cu<sub>x</sub>O ternary nanocomposites with multi-walled carbon nanotubes enabling a high-performance nonenzymatic amperometric glucose sensor

Amperometric Glucose Biosensor Based on Adsorption of Glucose Oxidase at Platinum Nanoparticle-Modified Carbon Nanotube Electrode

A glucose biosensor based on partially unzipped carbon nanotubes.

Study of Carbon Nanotubes-Hrp Modified Electrode and Its Application for Novel On-Line Biosensors.

High Sensitivity Glucose Biosensor Based On Pt Eelectrodeposition Onto Low-Density Aligned Carbon Nanotubes

Electrochemical Properties Analysis of Immobilized Glucose Oxidase on Multi-Walled Carbon Nanotubes and Hydroxy-Fullerene Nanocomposites