Abstract:Polydopamine (Pdop) has recently been shown to adsorb to a wide variety of surfaces and serves as an adhesion layer to immobilize biological molecules. In this work, the multifunctional carbon nanotube (CNT) composites were prepared though the oxidation of dopamine at room temperature and subsequent electroless silver deposition by mildly stirring. The stable immobilization and direct electron transfer of glucose oxidase were achieved on the composite film modified glassy carbon electrode. The resulting electrode gave a well-defined redox peaks with a formal potential of about −482mV (vs. SCE) in pH 7.0 buffer. The electron transfer rate constant was estimated to be 3.6s−1, due to the combined contribution of Pdop, CNTs and Ag nanoparticles with the help of Nafion. Furthermore, the method for detecting of glucose was proposed based on the decrease of oxygen caused by the enzyme-catalyzed reaction between glucose oxidase (GOD) and glucose. The linear response to glucose ranging from 50.0μM to 1.1mM (R2=0.9958), with a calculated detection limit of 17.0μM at a signal-to-noise ratio of 3. The low calculated apparent Michaelis–Menten constant (KMapp) was 5.46mM, implying the high enzymatic activity and affinity of immobilized GOD for glucose. It can reasonably be expected that this observation might hold true for other noble metal nanostructure-electroactive protein systems, providing a promising platform for the development of biosensors and biofuel cells.

Amperometric glucose biosensor based on boron-doped carbon nanotubes modified electrode.

A Pyrrole Quinoline Quinone Glucose Dehydrogenase Biosensor Based on Screen-Printed Carbon Paste Electrodes Modified by Carbon Nanotubes

Direct Electrochemistry of Glucose Oxidase and Biosensing for Glucose Based on Boron-Doped Carbon Nanotubes Modified Electrode

Amperometric Glucose Biosensor Based on Adsorption of Glucose Oxidase at Platinum Nanoparticle-Modified Carbon Nanotube Electrode

An Amperometric Glucose Biosensor Based on Glucose Oxidase Immobilized in Electropolymerized Poly(o-aminophenol) and Carbon Nanotubes Composite Film on a Gold Electrode

Amperometric bienzyme glucose biosensor based on carbon nanotube modified electrode with electropolymerized poly(toluidine blue O) film

Pre-oxidative Amperometric Glucose Biosensor Incorporated with Carbon Nanotube and PbO2

Platinum Nanoparticle Modified Polyaniline-Functionalized Boron Nitride Nanotubes for Amperometric Glucose Enzyme Biosensor.

An Amperometric Glucose Biosensor Fabricated with Pt Nanoparticle-Decorated Carbon Nanotubes/tio2 Nanotube Arrays Composite

Amperometric glucose biosensor prepared with biocompatible material and carbon nanotube by layer-by-layer self-assembly technique

Amperometric glucose biosensor based on carbon nanotubes and platinum nanoparticle modified gold electrode

Multifunctional carbon nanotubes for direct electrochemistry of glucose oxidase and glucose bioassay.

Amperometric Glucose Biosensor Based on Prussian Blue–multiwall Carbon Nanotubes Composite and Hollow PtCo Nanochains

A new amperometric glucose biosensor based on platinum nanoparticles/polymerized ionic liquid-carbon nanotubes nanocomposites

A glucose biosensor based on partially unzipped carbon nanotubes.

Amperometric Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Covalently Immobilized Carbon Nanotube Electrode.

Bienzymatic Glucose Biosensor Based on Poly(vinyl alcohol)/Titanium Dioxide Hybrid Materials and Carbon Nanotubes-Nanocopper-Modified Glassy Carbon Electrode

Nitrogen-Doped Carbon Nanotubes Supported by Macroporous Carbon As an Efficient Enzymatic Biosensing Platform for Glucose

Development of Amperometric Glucose Biosensor Based on Prussian Blue Functionlized TiO2 Nanotube Arrays

Glucose Biosensor Based on Platinum Nanoparticles Supported Sulfonated-Carbon Nanotubes Modified Glassy Carbon Electrode

Amperometric Sensor Based on Ferrocene-Modified Multiwalled Carbon Nanotube Nanocomposites As Electron Mediator for the Determination of Glucose