Abstract:A sensitive and selective amperometric glucose biosensor was obtained by using the electrodeposition of Pt nanoparticles on iron oxide-multiwall carbon nanotubes/chitosan (FeyOx-MWCNTs/CS) magnetic composite modified glassy carbon electrode (GCE) followed by the adsorption of glucose oxidase (GOx) at the surface of the electrode. FeyOx-MWCNTs magnetic composite was characterized by transmission electron microscopy (TEM). The modified process and the electrochemical characteristics of the resulting biosensor were characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry. The proposed biosensor exhibit excellent electrocatalytic activity and good response performance to glucose. The influence of various experimental conditions was examined for the determination of the optimum analytical performance. Under the optimal conditions, a linear dependence of the catalytic current upon glucose concentration was obtained in the range of 6.0×10−6 to 6.2×10−3M with a detection limit of 2.0×10−6M, and a response time of less than 8s. The apparent Michaelis–Menten constant (KMapp) was evaluated to be 9.0mM. Furthermore, the sensitivity for the determination of glucose at the GOx/Pt/FeyOx-MWCNTs/CS magnetic composite modified GCE is better than at common GOx/Pt/MWCNTs/CS and GOx/Pt-FeyOx/CS composite modified electrodes. The proposed biosensor has good anti-interferent ability and long-term storage stability after coating with Nafion, and it can be used for the determination of glucose in synthetic serum.

An Amperometric Glucose Biosensor Fabricated with Pt Nanoparticle-Decorated Carbon Nanotubes/tio2 Nanotube Arrays Composite

Pt Nanoparticles Inserting in Carbon Nanotube Arrays: Nanocomposites for Glucose Biosensors

Glucose biosensor based on Pt nanoparticles modified aligned carbon nanotubes electrode

Amperometric glucose biosensor based on carbon nanotubes and platinum nanoparticle modified gold electrode

Amperometric Biosensor Based on Carbon Nanotubes Coated with Polyaniline/ Dendrimer-Encapsulated Pt Nanoparticles for Glucose Detection

Amperometric Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Covalently Immobilized Carbon Nanotube Electrode.

A new amperometric glucose biosensor based on platinum nanoparticles/polymerized ionic liquid-carbon nanotubes nanocomposites

A well-dispersed Pt/Ni/TiO 2 nanotubes modified electrode as an amperometric non-enzymatic glucose biosensor

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

Gold and Platinum Nanoparticle-Functionalized TiO2 Nanotubes for Photoelectrochemical Glucose Sensing

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

Biosensor Based on Self‐Assembling Glucose Oxidase and Dendrimer‐Encapsulated Pt Nanoparticles on Carbon Nanotubes for Glucose Detection

Amperometric Glucose Biosensor Based on Palladium Nanoparticles Combined Aligned Carbon Nanotubes Electrode

Nickel/Copper Nanoparticles Modified TiO2 Nanotubes for Non-Enzymatic Glucose Biosensors

Glucose Sensor Based On Pt-Ruo2 Nanoparticles-Multi-Walled Carbon Nanotubes Nanocomposite

A Novel Self-Cleaning, Non-Enzymatic Glucose Sensor Working under a Very Low Applied Potential Based on a Pt Nanoparticle-Decorated TiO2 Nanotube Array Electrode

Fabrication of A Novel Glucose Biosensor Based on Pt Nanoparticles-Decorated Iron Oxide-Multiwall Carbon Nanotubes Magnetic Composite

Development of Amperometric Glucose Biosensor Based on Prussian Blue Functionlized TiO2 Nanotube Arrays

Nanocomposite based on depositing platinum nanostructure onto carbon nanotubes through a one-pot, facile synthesis method for amperometric sensing.

Direct Electron Transfer: Electrochemical Glucose Biosensor Based on Hollow Pt Nanosphere Functionalized Multiwall Carbon Nanotubes

A Glucose Biosensor Based on the Synergistic Action of Nanometer-Sized Tio2 and Polyaniline