Abstract:A novel amperometric glucose biosensor based on the nine layers of multilayer films composed of multi-wall carbon nanotubes (MWCNTs), gold nanoparticles (GNp) and glucose oxidase (GOD) was developed for the specific detection of glucose. MWCNTs were chemically modified with the H(2)SO(4)-HNO(3) pretreatment to introduce carboxyl groups which were used to interact with the amino groups of poly(allylamine) (PAA) and cysteamine via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide cross-linking reaction, respectively. A cleaned Pt electrode was immersed in PAA, MWCNTs, cysteamine and GNp, respectively, followed by the adsorption of GOD, assembling the one layer of multilayer films on the surface of Pt electrode (GOD/GNp/MWCNTs/Pt electrode). Repeating the above process could assemble different layers of multilayer films on the Pt electrode. PBS washing was applied at the end of each assembly deposition for dissociating the weak adsorption. Film assembling and characterization were studied by transmission electron microscopy and quartz crystal microbalance, and properties of the resulting glucose biosensors were measured by electrochemical measurements. The marked electrocatalytic activity of Pt electrode based on multilayer films toward H(2)O(2) produced during GOD enzymatic reactions with glucose permitted effective low-potential amperometric measurement of glucose. Taking the sensitivity and selectivity into consideration, the applied potential of 0.35 V versus Ag/AgCl was chosen for the oxidation detection of H(2)O(2) in this work. Among the resulting glucose biosensors, the biosensor based on nine layers of multilayer films was best. It showed a wide linear range of 0.1-10mM glucose, with a remarkable sensitivity of 2.527 microA/mM, a detection limit of 6.7 microM estimated at a signal-to-noise ratio of 3 and fast response time (within 7s). Moreover, it exhibited good reproducibility, long-term stability and the negligible interferences of ascorbic acid, uric acid and acetaminophen. The study can provide a feasible approach on developing new kinds of oxidase-based amperometric biosensors, and can be used as an illustration for constructing various hybrid structures.

Amperometric Glucose Biosensor Based on Adsorption of Glucose Oxidase at Platinum Nanoparticle-Modified Carbon Nanotube Electrode

Amperometric Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Covalently Immobilized Carbon Nanotube Electrode.

An Amperometric Glucose Biosensor Based on Glucose Oxidase Immobilized in Electropolymerized Poly(o-aminophenol) and Carbon Nanotubes Composite Film on a Gold Electrode

A new amperometric glucose biosensor based on platinum nanoparticles/polymerized ionic liquid-carbon nanotubes nanocomposites

Amperometric glucose biosensor based on carbon nanotubes and platinum nanoparticle modified gold electrode

Amperometric glucose biosensor based on platinum nanoparticle-modified carbon nanotube electrode on Nafion backbone

Glucose Biosensor Based on Platinum Nanoparticles Supported Sulfonated-Carbon Nanotubes Modified Glassy Carbon Electrode

Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Carbon Nanotubes and Immobilizing Enzyme with Chitosan-Sio2 Sol-Gel

Amperometric glucose biosensor based on boron-doped carbon nanotubes modified electrode.

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

An Amperometric Glucose Biosensor Fabricated with Pt Nanoparticle-Decorated Carbon Nanotubes/tio2 Nanotube Arrays Composite

Nanocomposite based on depositing platinum nanostructure onto carbon nanotubes through a one-pot, facile synthesis method for amperometric sensing.

Direct Electron Transfer: Electrochemical Glucose Biosensor Based on Hollow Pt Nanosphere Functionalized Multiwall Carbon Nanotubes

Multifunctional carbon nanotubes for direct electrochemistry of glucose oxidase and glucose bioassay.

High Sensitivity Glucose Biosensor Based On Pt Eelectrodeposition Onto Low-Density Aligned Carbon Nanotubes

Amperometric glucose biosensor based on multilayer films via layer-by-layer self-assembly of multi-wall carbon nanotubes, gold nanoparticles and glucose oxidase on the Pt electrode.

Direct Electron Transfer of Glucose Oxidase and Biosensing for Glucose Based on PDDA-capped Gold Nanoparticle Modified Graphene/multi-Walled Carbon Nanotubes Electrode

Immobilization of Glucose Oxidase into a Nanoporous TiO2 Film Layered on Metallophthalocyanine Modified Vertically-Aligned Carbon Nanotubes for Efficient Direct Electron Transfer

A New Biosensor Based on Glucose Oxidase-Ag Nanoparticle Modified Platinum Electrode with Naphthol Green B as Mediator

Platinum Nanoparticle Modified Polyaniline-Functionalized Boron Nitride Nanotubes for Amperometric Glucose Enzyme Biosensor.

Glucose biosensor based on Pt nanoparticles modified aligned carbon nanotubes electrode