Abstract:Conical picks are widely used in fields such as tunnel excavation, and high temperatures often occur on the surfaces of conical picks during the hard rock cutting process. To explore the influence of temperature on the wear of conical picks, a rotary cutting test was arranged. The cutting head torque, heat distribution and wear on the conical pick at different rotating speeds and cutting depths were explored. Moreover, the working process with and without cooling liquid was taken into consideration, and the mass losses of the conical pick under those conditions were analyzed. The experimental results showed that under cooling liquid conditions, the maximum temperature on the conical pick decreased by 230°, and the mean mass loss of the conical pick decreased by 15.8 g. Therefore, high temperature could not be ignored in hard rock cutting. On the basis of these findings, a method for the measurement of rock abrasiveness was proposed in this paper, and different from previous research, the thermal effect was taken into consideration. A test bed for rock abrasiveness measurement was assembled in which a sintered WC-Co rod was used for rotary grinding on the rock sample, and the mass loss of the grinding rod was determined to evaluate the rock abrasiveness. The loading force between the grinding rod and rock sample was considered in the measurement of rock abrasiveness. The results showed that the mass losses of sintered WC-Co rods increased with the loading force. In addition, the characteristics of oxygen found from scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) showed that peeling and cracking could be found at distances of 5 mm and 10 mm from the end face of the grinding rod, and the increased oxygen content suggested obvious oxidization at those regions as well.

High-temperature mechanical properties of a cemented carbide cutter during extra-heavy cutting process

Analysis of High Temperature Wear Process Mechanism of Cemented Carbide Tool

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Adhering Failure and Optimization of Cemented Carbide Inserts for the Heavy-Duty Cutting of High-Strength Steel Forgings

Material and processing optimization on disc cutter of tunnel boring machine for failure prevention

Impact Damage Behavior of the Cemented Carbide Insert in the Heavy Cutting Process

Experiment Study on Cutter Disrepair Principle and Optimization for Machining Heat-Resistant Steel

Study on the adhering failure mechanism of cemented carbide inserts and element diffusion model during the heavy-duty cutting of water chamber head

High-temperature Mechanical Behavior of Ultra-Coarse Cemented Carbide with Grain Strengthening

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Effect of Ambient Temperature on Wear of Cemented Carbide Tool Material

Friction and Wear of Typical Tool Material at Elevated Temperature

Temperature Experiment and Parameter Optimization of Cemented Carbide Tool in Milling 508III Steel

High temperature fracture mechanism of ultrafine WC-Co cemented carbides containing (Ti,W)C

Analysis of Fatigue Damage of Cemented Carbide Insert During the Heavy-Duty Milling of Water Chamber Head

Enhanced high temperature mechanical properties of WC-Co cemented carbides by VC addition

A Novel Finite Element Method for the Wear Analysis of Cemented Carbide Tool During High Speed Cutting Ti6Al4V Process

Experimental investigation of the failure of conical picks under thermal and abrasive effects

3D Finite Element Simulation on High-speed Dry Hard Turning Process and Experiment Analysis

Optimizing Design of the Cutting Tool in Cutting of Ultra-High Strength Steel Beam Part

The influence of components on the high‐temperature performance and cutting performance of Si3N4‐based ceramic tools