Tool wear evolution and its influence on cutting performance during milling ultra-high-strength steel using different cooling conditions
Bangfu Wu,Minxiu Zhang,Biao Zhao,Wenfeng Ding,Hailong Cui
DOI: https://doi.org/10.1007/s00170-024-14577-6
IF: 3.563
2024-10-11
The International Journal of Advanced Manufacturing Technology
Abstract:Severe tool wear significantly impacts both the tool life and machined surface quality when machining difficult-to-cut materials. Sufficient cooling and lubrication capacity provided by cutting fluid can effectively mitigate tool wear, whereas conventional flood cooling methods consume excessive amounts of cutting fluid, raising serious environmental concerns. The atomization mode of cutting fluid is accompanied by a minimum quantity of cutting fluid, and it has demonstrated exceptional cooling and lubrication performance for machining difficult-to-cut materials. In this work, various sustainable cooling conditions were employed, including dry cutting, high-pressure air cooling (HPAC), air atomization of cutting fluid (AACF), and ultrasonic atomization of cutting fluid (UACF). A series of experiments were implemented to investigate the tool wear behavior during the milling process of ultra-high-strength steel under different cooling conditions. The effects of tool wear evolution on the milling force, surface quality, and chip morphology were thoroughly analyzed. Results showed that micro-chipping, macro-chipping, and breakage were the primary wear evolution forms of the tool in HPAC condition, while the tools experienced abrasion, chipping, and breakage in the dry, AACF, and UACF processes. The occurrence of severe tool wear, leading to poor surface quality and chip tearing, was observed as the maximum flank wear width VB max exceeded 0.2 mm. Compared to other cooling conditions, the UACF process exhibited the lowest tool wear and resultant milling force, as well as the best surface quality, attributed to the exceptional cooling and lubrication performance of droplets generated through ultrasonic atomization.
engineering, manufacturing,automation & control systems