Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. To address the challenge associated with optimizing the number and positioning of accelerometer points in ship acoustic reconstruction, factor analysis is applied to the automatic optimization of accelerometer position in this work according to the source independence of ship's underwater radiated noise. Based on the numerical simulation method that calculates the vibration noise response under specific operation conditions, the minimum number and the optimal position of the accelerometers can be obtained through the factor analysis and multi-parameter comprehensive evaluation method. The results of acoustic reconfiguration and testing are compared using one test cabin as a validation object to verify the effectiveness of the proposed method. The results show that the automatic optimization algorithm can improve the reconstruction accuracy concerning the uniform distribution method. The error is reduced from 15.46% (1.5 dB) to 8.35% (0.8 dB), and the correlation coefficient is improved from 0.86 to 0.89. The semi-automatic optimization method is slightly lower in terms of errors and correlation coefficients compared to the automatic optimization algorithm. After increasing the number of monitoring positions for automatic optimization, the acoustic reconstruction accuracy is further improved, while the average error is reduced to 7.37% (0.7 dB) and the correlation coefficient is improved from 0.89 to 0.92. The experimental results are proximate to the conclusions of the simulation calculation. Even under the circumstance of multi-factor noise interference, the correlation coefficient of multi-position automatic optimization can still reach 0.8, in comparison with the uniform distribution method, the error is reduced from 32.49% (3.4 dB) to 25.94% (2.6 dB). The proposed method effectively captures the dynamic characteristics of complex structures and their impact on underwater radiated noise, and the integration of factor analysis can prominently enhance the computational efficiency, thereby providing technical support for engineering applications to the ship acoustic reconstruction.

Source identification methods of low and medium frequency ship structural noise

A Simplified Model for Ship's Radiated Noise Sources

The load criteria for ship mechanical noise prediction in low frequencies and experimental validation

Testing and analytical methods for ship transient noise

Imaging of Ship Noise Based on Simulation Noise Signal

Discrete Distribution Model of Ship Noise Source in Shipping Channel

Application of a Hybrid Method in the Analysis Acoustic-structure Coupled System

Vibration Source Identification and Diagnosis Based on the Source Number Estimation for Ships

Energy-averaged Method for Ship Mechanical Noise Prediction under Kinematic Excitation in the Full Frequency Domain

The experimental research on identification and quantification of mechanical noise in submarine cabin model

A method of obtaining ship main noise sources parameters

Separation and quantification of frequency coupled noise sources of submarine cabin

Analysis of the structural vibration and noise radiation of a SWATH ship based on hydroelastic method

A factor analysis based automatic optimization method of vibration sensor points for ship acoustic reconstruction

Feature Extraction of Ship-Radiated Noise Based on Intrinsic Time-Scale Decomposition and a Statistical Complexity Measure.

Study on Ship Underwater Acoustic Radiation under Single-Unit Operating Condition During Low Frequency

Comparative Study on Numerical Methods for Underwater Low-Frequency Radiation Noise of Ship

Prediction and Reduction of Cabin Noise for a 300 Ton Fishery Administration Ship

Numerical Analysis and Optimization of Noises of Ship Cabins in the Low Frequency

Human-induced noise study for cruise cabin: Numerical analysis and experimental validation

Characteristics of Low and Middle Frequency Underwater Noise from a Catamaran