Abstract:Adding catalysts can usually substantially enhance pollutant removal during laboratory semi-batch ozonation experiments with continuous ozone gas bubbling. However, it is unclear whether the enhanced pollutant abatement is mainly caused by the higher (OH)-O-center dot yields (moles of (OH)-O-center dot formed per mole of O-3 consumed) or the higher O-3 utilization efficiency in the presence of the catalysts-two effects that can or cannot be effectively transferred to large-scale applications, respectively. To distinguish these two effects during the laboratory experiments, this study compared oxalate removal by conventional ozonation (in the absence of catalysts) and catalytic ozonation with three carbon nanotube catalysts based on the consumed O-3 doses during the different processes. In addition, the results of several previous studies that had evaluated varying catalysts (e.g., NiCo2O4, MnFe2O4, and MnO2) for pollutant removal by catalytic ozonation were revisited based on the consumed O-3 doses measured in these studies. The results show that while all the catalysts considerably accelerated O-3 transfer/consumption and pollutant removal during catalytic ozonation than during conventional ozonation, many of them did not enhance the extent of pollutant removal when the same O-3 doses were consumed during the two processes. This finding suggests that in the laboratory experiments, these catalysts only enhanced the O-3 utilization efficiency but did not significantly enhance the (OH)-O-center dot yield from O-3 decomposition during catalytic ozonation relative to conventional ozonation. Therefore, they may not be able to enhance pollutant removal during large-scale applications to the same extent as has been shown in the laboratory experiments. These results indicate that to more realistically predict the performance of catalysts for large-scale applications, the extent of pollutant removal should be evaluated based on the transferred/consumed O-3 doses during the laboratory experiments.

Effect of catalyst wetting on the performance of tricklebed reactors

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Reproducible Technique For Packing Laboratory-Scale Trickle-Bed Reactors With A Mixture Of Catalyst And Fines

The Effect of Mixing on Co‐precipitation and Evolution of Microstructure of Cu‐ZnO Catalyst

Effectiveness Factor of Partially Wetted Catalyst Particles: Evaluation and Application to the Modeling of Trickle Bed Reactors

Effectiveness Factors for a Partially Wetted Catalyst Based on the Rivulet Flow Model

Comparison Of Upflow And Downflow Two-Phase Flow Packed-Bed Reactors With And Without Fines: Experimental Observations

Advanceson improving the attrition resistance of molecular sieve catalysts for fluidized bed

Coupling Non-Isothermal Trickle-Bed Reactor with Catalyst Pellet Models to Understand the Reaction and Diffusion in Gas Oil Hydrodesulfurization

Dynamic Impacts of Catalyst Management on Self-fluidized Pump-Free Ebullated-Bed Reactor

Role of catalyst topology in methanol synthesis

Optimizing Catalyst Supports at Single Catalyst Pellet and Packed Bed Reactor Levels: A Comparison Study

Investigation of Hydrogenation and Mass Transfer Performance in Micropacked Beds with Highly Active Monolithic Catalysts

External Wetting Efficiency in a Three-Phase Fixed Bed Loaded with Porous and Non-Porous Packings

Mass Transfer Enhancement and Drying Mechanism of High Adhesion Saturated Impregnated Co-Al2O3 Monolithic Catalyst

Evaluation on the Dependence of Multiphase Flow and Reaction Upon the Morphology of A Porous Media Network

Enhanced Performance of Catalyst Pellets for Methane Dry Reforming by Engineering Pore Network Structure

Evaluation of trickle bed reactor models for a liquid limited reaction

Modelling Diffusion and Reaction for Inert‐core Catalyst in Batch and Fixed Bed Reactors

Evaluation of the Effect of Catalysts on Ozone Mass Transfer and Pollutant Abatement During Laboratory Catalytic Ozonation Experiments: Implications for Practical Water and Wastewater Treatment

Unsteady-state Operation of Trickle-Bed Reactor for Dicyclopentadiene Hydrogenation