Abstract:In this study, modeling and simulation of the dynamic behavior of an industrial-scale trickle bed reactor (TBR) with application to a hydropurification process for production of purified terephthalic acid (PTA) are carried out. The impacts of hydrodynamic parameters such as reactor bed porosity, liquid hourly space velocity (LHSV), and liquid–solid and gas–liquid mass transfer coefficients on the industrial hydropurification TBR performance (in particular, on the catalyst lifetime) are analyzed. As the palladium supported on carbon (Pd/C) catalyst deactivates with time, the concentration of impurities in the product, especially 4-carboxybenzaldehyde (4-CBA) as the main impurity of PTA, increases. The three-phase dynamic mathematical model developed in this research work is validated against the plant data, and an average relative error of 2.2% is obtained for the concentration of 4-CBA. The lifetime of the catalyst based on plant data is 348.2 ± 5.0 days; this value is estimated to be 365.1 days from the simulation results, showing a 4.8% error. According to the sensitivity analysis on the model parameters, the effects of LHSV and bed porosity are in the same direction and magnitude, while the effects of the liquid–solid and gas–liquid mass transfer coefficients are in the opposite direction, and their impacts are also less significant. These parameters are disturbed in a range of up to ±15%, compared to the normal operating conditions that results in an absolute catalyst lifetime change of 2.9%–14.2%. The maximum and minimum variations in the catalyst lifetime are obtained when LHSV is disturbed by ±10%, exhibiting a catalyst lifetime change of 14.2% at a −10% disturbance (416.9 days) and −6.5% at a +10% disturbance (341.3 days). A +15% disturbance in the liquid–solid mass transfer coefficient increases the catalyst lifetime by 2.9% (375.8 days), and a −15% disturbance decreases this vital parameter by 3.7% (351.8 days). Eventually, the findings of this study might be applied to the relevant industrial sectors, providing the required close and meticulous control of the process.

Unsteady-state Operation of Trickle-Bed Reactor for Dicyclopentadiene Hydrogenation

System optimization of cyclohexane dehydrogenation under multiphase reaction conditions using the uniform design method

Optimizing Alkyne Hydrogenation Performance of Pd on Carbon in Situ Decorated with Oxygen-Deficient TiO2 by Integrating the Reaction and Diffusion

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Cstr Model for P-Xylene Oxidation Reactor

Dimethyl Terephthalate Hydrogenation to Dimethyl Cyclohexanedicarboxylates over Bimetallic Catalysts on Carbon Nanotubes

Periodically operated trickle-bed reactor for EAQs hydrogenation: Experiments and modeling

Dicyclopentadiene hydrogenation in trickle-bed reactor under forced periodic control

Liquid-Phase Hydrogenation of Dicyclopentadiene on Ni/HY Catalysts

Modeling of a Pilot-Scale Trickle Bed Reactor for the Catalytic Oxidation of Phenol

Kinetics of liquid phase catalytic hydrogenation of dicyclopentadiene over Pd/C catalyst

CONTINOUS DEHYDROGENATION OF CYCLOHEXANE UNDER MULTI-PHASE REACRTION CONDITIONS(I)

Operando Nuclear Magnetic Resonance (NMR) studies of a Trickle-bed Reactor using D-T2 Correlations

Performance analysis of crude terephthalic acid hydropurification in an industrial trickle-bed reactor experiencing catalyst deactivation

Study on the dehydrogenation of perhydro-dibenzyltoluene catalyzed by Pt/Al 2 O 3 in a fixed bed reactor

Liquid-phase heterogeneous hydrogenation of dicyclopentadiene

Multiphase flow and multicomponent reactive transport study in the catalyst layer of structured catalytic packings for the direct hydration of cyclohexene

Preparation of supported palladium catalyst from hydrotalcite-like compound for dicyclopentadiene resin hydrogenation

Dynamic Modeling Strategy To Assess Impacts of Hydrodynamic Parameters on Industrial Hydropurification Process by Considering Catalyst Deactivation

Hydrogenation of dicyclopentadiene catalyzed by Nickel catalyst

Design of a novel tubular membrane reactor with a middle annular injector for enhancement of dry reforming towards high hydrogen purity: CFD analysis