Abstract:The contradiction between strength and ductility limits the application of high-entropy alloys (HEAs). To simultaneously improve the strength and ductility of HEAs, the cryogenic treatment was proposed and applied in this paper. The Al0.6CrFe2Ni2 HEA with dual-phase structure was selected as the experimental material for cryogenic treatment. The microstructure and mechanical properties of the HEA in an as-cast and cryogenically treated state were analyzed in detail. The results showed that the grain size of equiaxed crystal in the alloy decreased continuously by prolonging the cryogenic treatment time, and the average value was 44.6 μm for the cryogenically treated HEA at the time of 48 h, which was 46.5% lower than that of the as-cast alloy. The number and size of ordered body-centered cubic (B2) spherical nanophases embedded in the body-centered cubic (BCC) structured inter-dendritic region, however, increased continuously by extending the cryogenic treatment time. The cryogenic treatment also made more slip systems activate, cross-slip occurred in the alloy, and a large number of stacking faults were found in the transmission electron microscopy (TEM) microstructure for the alloy that underwent a long time in cryogenic treatment. The yield strength of the Al0.6CrFe2Ni2 HEA was gradually increased with the increase in cryogenic treatment time, and the maximum yield strength of the 48 h cryogenically treated alloy was 390 MPa, which was 39.3% higher than that of the as-cast. This increase in mechanical properties after cryogenic treatment was attributed to the refinement of grains and the large precipitation of nanophases, as well as the appearance of cross-slips and stacking faults caused by cryogenic treatment.

Effect Of Compound Cryogenic Treatment On Microstructure And Thermal Fatigue Properties Of Zcual(10)Fe(3)Mn(2) Alloy

Effects of laser shock processing, solid solution and aging, and cryogenic treatments on microstructure and thermal fatigue performance of ZCuAl10Fe3Mn2 alloy

Effects of Deformation at High, Medium, and Cryogenic Temperatures on the Microstructures and Mechanical Properties of Al-Zn-Mg-Cu Alloys

Effect of Final Thermomechanical Treatment on the Mechanical Properties and Microstructure of T Phase Hardened Al-5.8Mg-4.5Zn-0.5Cu Alloy

EFFECTS OF THERMAL MECHANICAL TREATMENT ON THE MICROSTRUCTURES AND HARDNESS OF AN Al-Zn-Mg-Cu ALLOY PLATE

Mechanism of cryogenic, solid solution and aging compound heat treatment of die-cast Al alloys considering microstructure variation

Evolution of microstructure, mechanical properties and corrosion behavior of Al-4Mg-2Zn-0.3Ag (wt.%) alloy processed by T6 or thermomechanical treatment

Effect of heat treatment on microstructure and mechanical properties of Cu–6.9Ni–2.97Al–0.99Fe–1.06Mn alloy

Effect of Pretreatment and Cryogenic Temperatures on Mechanical Properties and Microstructure of Al-Cu-Li Alloy

Effects of deep cryogenic treatment on microstructure, mechanical, and corrosion of ZK60 Mg alloy

Effect of deep cryogenic treatment on the microstructure and mechanical properties of Al–Cu–Mg–Ag alloy

Effect of deep cryogenic treatment on microstructures and mechanical properties of automotive 6063Al alloy

The Effect of Annealing and Cryogenic Treatment on the Microstructure and Mechanical Properties of Ti-6Al-4V Alloy

Effect of Cryogenic Treatment on Microstructure and Mechanical Properties of Al0.6CrFe2Ni2 Dual-Phase High-Entropy Alloy

Effect of heat treatment on the microstructure and mechanical properties of cryogenic rolling 2195 Al–Cu–Li alloy

Effect mechanism of cryogenic treatment on ferroalloy and nonferrous alloy and their weldments: A review

Effect of cryogenic rolling and multistage thermo-mechanical treatment on the microstructure and properties of the Cu-0.4Cr-0.39Zn-0.1Mg-0.07Zr alloy

The Study of Microstructure and Mechanical Properties of High Strength and Toughness Casting Al-Cu Alloy

Influence of Zr Microalloying on the Microstructure and Room-/High-Temperature Mechanical Properties of an Al–Cu–Mn–Fe Alloy

Effect of Novel Thermomechanical Treatment on Microstructure and Properties of 6156 Alloy

Effect of Deep Cryogenic Time on the Microstructure and Mechanical Property of Cr-Mn-Si High-Strength Alloy Steel