Abstract:The precise evaluation of the potential damage caused by large commercial aircraft crash into civil structures, especially nuclear power plants (NPPs), has become essential design consideration. In this study, impact of Boeing 767 against rigid wall and outer containment building (reinforced concrete) of an NPP are simulated in ANSYS/LS-DYNA by using both force time history and missile target interaction methods with impact velocities ranging from 100 m/s to 150 m/s. The results show that impact loads, displacements, stresses for concrete and steel reinforcement, and damaged elements are higher in case of force time history method than missile target interaction method, making the former relatively conservative. It is observed that no perforation or scabbing takes place in case of 100 m/s impact speed, thus preventing any potential leakage. With full mass of Boeing 767 and impact velocity slightly above 100 m/s, the outer containment building can prevent local failure modes. At impact velocity higher than 120 m/s, scabbing and perforations are dominant. This concludes that in design and assessment of NPP structures against aircraft loadings, sufficient thickness or consideration of steel plates are essential to account for local failure modes and overall structural integrity. Furthermore, validation and application of detail 3D finite element and material models to full-scale impact analysis have been carried out to expand the existing database. In rigid wall impact analysis, the impact forces and impulses from FE analysis and Riera's method correspond well, which satisfies the recommendations of relevant standards and further ensure the accuracy of results in full-scale impact analysis. The methodology presented in this paper is extremely effective in simulating structural evaluation of full-scale aircraft impact on important facilities such as NPPs.

Analysis of impact force of large commercial aircraft on rigid wall and nuclear power plant containment

Comparative assessment of impact analysis methods applied to large commercial aircraft crash on reinforced concrete containment

An Integral Numerical Analysis of Impact of a Commercial Aircraft on Nuclear Containment

Numerical Analyses of a Shield Building Subjected to a Large Commercial Aircraft Impact

Sensitivity Analysis of Steel-Plate Concrete Containment against a Large Commercial Aircraft

Finite element analysis of single steel-plate concrete composite containment of nuclear power plant under commercial aircraft impact

Comparing different fidelity models for the impact analysis of large commercial aircrafts on a containment building

Finite Element Analyses on the Soft Projectile Impact Testing of a Wall-floor-wall Reinforced Concrete Structure

Influence of Different Sites on Impact Response of Steel-Plate Concrete Containment against a Large Commercial Aircraft

Preliminary evaluation of aircraft impact on a near term nuclear power plant

Aircraft impact analysis of nuclear safety-related concrete structures: A review

Dynamic Analysis of Reactor Containment Subjected to Aircraft Impact Loading

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

Numerical simulation of the disk fragment impacting resistance of plate target

The Shock and Impacting Load Simulation of the Nuclear Power Plant Crashed by the Aircraft

Comparative analyses of a shield building subjected to a large commercial aircraft impact between decoupling method and coupling method

Investigating the Effect of Supports on Reinforced Concrete Slab Subjected to Oblique Missile Impact

Study on horizontal dynamic response of engineering structures with buffer-layer under impact action of fuel container

Numerical Analysis of Aircraft Impact on Wall of High Temperature Gas-Cooled Reactor Building and Evaporator Cavity

Impact Analysis of a Commercial Airplane Over a Nuclear Spent Fuel Dry Storage Cask

Investigation on the aircraft impact resistance of Steel-concrete construction