Abstract:The main objective of the current study is to investigate the response of an internally pressurized nuclear power plant containment structure at pressure values higher than design pressure, and is focused on the response of prestressed concrete containment to ultimate global structural failure. The containment structure consists of a prestressed concrete cylindrical perimeter wall, with a prestressed concrete tori-spherical dome, prestressed concrete ring beam, and conventionally reinforced concrete base slab. The finite element program ANSYS is used to predict the non-liner behaviour of the containment structure. Different techniques available in ANSYS program to model steel reinforcements for reinforced concrete and prestressed concrete is estimated to define a more suitable approach to model prestressing system. The approach proposed here is capable of incorporating parameters such as variation in tendon layout and non-uniform prestress losses in comparison to those done by other researchers. It is concluded that the design criteria for the containment structure are fully satisfied. No through crack was observed at design pressure. The first through crack develops in the dome at a pressure of 2.1 times the design pressure. There is no damage to be expected to the reactor systems up to a pressure well above design pressure. It is observed that the containment structure subject of this study meets the design requirement of the current standards and behaves linearly in excess of 1.5 times the design pressure. The response of the internally pressurized containment structure including the major openings is investigated. It is concluded that presence of openings does not have a significant effect on the pressure capacity of the containment structure. The minor differences in the responses are at pressure values beyond the linear limit and are less than 5%. The response when openings are included are very similar to those without openings, except at the immediate neighboring of the equipment airlock opening. It is concluded that to predict the pressure response of containment structure, including the openings can be ignored. In case of need for a more exact response, only the equipment airlock can be included in the model

Preliminary evaluation of aircraft impact on a near term nuclear power plant

Aircraft Impact Effects on an Aged NPP

Comparative assessment of impact analysis methods applied to large commercial aircraft crash on reinforced concrete containment

Aircraft impact analysis of nuclear safety-related concrete structures: A review

An Integral Numerical Analysis of Impact of a Commercial Aircraft on Nuclear Containment

Analysis of impact force of large commercial aircraft on rigid wall and nuclear power plant containment

Finite element analysis of single steel-plate concrete composite containment of nuclear power plant under commercial aircraft impact

Sensitivity Analysis of Steel-Plate Concrete Containment against a Large Commercial Aircraft

Influence of Different Sites on Impact Response of Steel-Plate Concrete Containment against a Large Commercial Aircraft

General Assessment of the NPP Containment Strength Hit by Air Weapons

Impact Analysis of a Commercial Airplane Over a Nuclear Spent Fuel Dry Storage Cask

Finite Element Analyses on the Soft Projectile Impact Testing of a Wall-floor-wall Reinforced Concrete Structure

Analytical Study on Dynamic Response of Reinforced Concrete Structure with Internal Equipment Subjected to Projectile Impact

Nonlinear Time History Analysis of a Pre-Stressed Concrete Containment Vessel Model under Japan's March 11 Earthquake

Non-Linear Analysis Of A Nuclear Containment Structure Under High Internal Pressure

Numerical Analysis of Aircraft Impact on Wall of High Temperature Gas-Cooled Reactor Building and Evaporator Cavity

Investigating the Effect of Supports on Reinforced Concrete Slab Subjected to Oblique Missile Impact

Sensitivity of the neutron multiplication factor to water ingress into a spent fuel cask

Development of an Instantaneous Loading Impact Test System for Containment of a Nuclear Power Plant during Aircraft Impact on Steel Bar Joints

Investigation on the aircraft impact resistance of Steel-concrete construction

Comparative analyses of a shield building subjected to a large commercial aircraft impact between decoupling method and coupling method