Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

Shaking table test and comparison analysis for base-isolated high-rise buildings with different aspect ratios

Shaking Table Test on High-Rise Isolated and Non-Isolated Structures

Shaking Table Tests on the Multi-Dimensional Seismic Response of Long-Span Grid Structure with Base-Isolation

Shaking table test of a steel frame structure with layered three‐dimensional isolation

Shaking Table Tests on Earthquake Response Characterization of a Complex Museum Isolated Structure in High Intensity Area

Shaking table and pseudodynamic tests for the evaluation of the seismic performance of base-isolated structures

Comparative study on high-rise isolated structure founded on various soil foundations by using shaking table tests

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Simulated Shaking Table Test Research of Isolated and Non-Isolated Frame Structure Model

Test study on dynamic characteristics of base-isolated structure on variable stiffness foundation

Research on shaking table test of base isolated and ordinary structure

Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects

Shaking table test of damping ratio of strengthening-adding-story isolation structures

Shaking table test and numerical analysis of an asymmetrical twin‐tower super high‐rise building connected with long‐span steel truss

Analysis on the Torsion Parameters of L-shaped High-Rise Isolation Buildings

Shaking table test of a novel Three-dimensional seismic isolation system with inclined rubber bearings

Shaking table test and numerical analyses of a multi‐story traditional tower‐style building

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Shaking Table Model Test of Jinan Olympic Stadium

Shaking table test for a mid-highrise big-bay RC frame model with special-shaped columns

A new form of steel base isolation system for seismic high-rise building