Applications of RS-485 interface in the vacuum measurement

Xun WANG,Yun-feng ZHANG

DOI: https://doi.org/10.3969/j.issn.1002-0322.2014.01.003

IF: 4

2014-01-01

Vacuum

Abstract:The use of RS-485 interface in the vacuum gauges , such as DL series , was introduced in this paper .

What problem does this paper attempt to address?

Design of Intelligent and Low-Power for Vortex Flow-Meter

HU Hai-qing,CHEN Zhang-wei

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.11.011

2006-01-01

Abstract:A kind of intelligent and low-power for vortex flow-meter was designed,based on the low-power(consumption) chip-MSP430F149,it has the LCD module and RS485 communication interface.The 4-20mA standard electric current output was implemented,the measurement and display of instantaneous flux and integrated flux were also implemented.
Application of USB host in digital temperature-humidity recorder

LU Jian-gang

2006-01-01

Abstract:It was briefly introduced how to apply the USB host in the digital Temperature-Humidity Recorder,and proposed the realization plan of USB host based on the SL811HS.This Host recorder can read and write the USB floppy disk,thus may disposethe work parameter of recorder through the USB floppy disk,also may write the history data which records to the USB floppy disk,then analysis processing by PC.
Void Fraction Measurement Of Gas-Liquid Two-Phase Flow Based On (Cd)-D-4 Technique

Lei Wang,Zhiyao Huang,Baoliang Wang,Haifeng Ji,Haiqing Li

2012-01-01

Abstract:The feasibility of applying capacitively coupled contactless conductivity detection ((CD)-D-4) technique to void fraction measurement of gas-liquid two-phase flow is investigated. As a preliminary study, this research focuses on the void fraction measurement of stratified flow and includes three parts. First, a (CD)-D-4 sensor is developed based on series resonance principle, and a void fraction measurement system of gas-liquid two-phase flow is constructed based on (CD)-D-4 technique. Second, simulation analysis is performed to study the performance of the developed (CD)-D-4 sensor for void fraction measurement. Third, with the constructed void fraction measurement system, experiments are carried out in the pipe with 15.6mm inner diameter, and the measurement results are compared with the simulation results. Experiment results show that the developed (CD)-D-4 sensor is successful and the constructed void fraction measurement system is effective. The monotonicity and the resolution of the developed (CD)-D-4 sensor for void fraction measurement are satisfactory. The comparison of the simulation results and the experiment results shows that the practical measurement results are in good agreement with the simulation analysis. This research work verifies that applying (CD)-D-4 to void fraction measurement of gas-liquid two-phase flow is feasible (at least, for the void fraction measurement of stratified flow).
Study of Teledata Acquisition System Based on LabView

张正华,李锡华

DOI: https://doi.org/10.3969/j.issn.1004-373X.2003.24.034

2003-01-01

Abstract:The data acquisition is a hotspot in industry control research what based on LabView.In this character,it is introduced the LabView which is the graphics languageprogramming the PCL711B, and achieve the temperature collection, and Secondary channel RS232′s interface by way of the light end machine is realized telecommunication of data.
Measurement and control system for gas-tight deep-sea water sampler based on LabVIEW

Huang Haocai,Yang Canjun,Chen Daohua,Niu Wenda,Chen Ying

DOI: https://doi.org/10.19650/j.cnki.cjsi.2011.01.007

2011-01-01

Abstract:The measurement and control system of exiting conventional CTD sampler suffers from low automation level and complicated operation.In order to solve this problem,a measurement and control system based on LabVIEW for gas-tight deep-sea water sampler was developed.The measurement principle of temperature,salinity and depth was studied.The hardware and software of the system were designed.In the year of 2009,the measurement and control system worked well during the HY4-2009-2 cruise of "Hai Yang Si Hao" research vessel in South China Sea.Quick and precise control of the gas-tight deep-sea water sampler was achieved.The acquisition,processing,display and storage of temperature,salinity and depth parameters were implemented conveniently in real-time.The results of sea trials show that the system features high measurement and control precision,good stability and reliability,high automation level and easy operation.The system is appreciated by researchers.Furthermore,the proposed method can also be used widely in the measurement and control systems of various oceanic instruments and equipment.
Design and Realization of Temperature Limiter Measurement and Control System

王恒奎,潘峰,边耐欣,陈子辰

DOI: https://doi.org/10.3969/j.issn.1000-8829.2001.05.011

2001-01-01

Abstract:The development of measurement & control system under Windows is introduced,and the system's function,design of hardware and software are discussed in detail .At the end of this paper, we think it has a wide application prospect in industry.
Design of Indoor Soil Temperature and Humidity Detection Instrument Based on RS-485 and RS-232

Duan Wen-xiu

Abstract:Indoor soil temperature and humidity detection instrument based on RS-485 and RS-232 was designed for rapid survey of temperature and humidity of indoor potting soil.The instrument included the design of the hardware system,the main sensor,the sensor wiring board and observation system.The RS-485 and the RS-232 were selected as the communication interface.Four-pin high sensitivity sensors were designed according to Topp principle.The observation system is programmed by the good GUI language VB,to collect the soil data.The testing results show that the instrument has a higher measurement accuracy and it is reliable.The system has a good human-computer operating environment and a friendly interface.It is easy to be functionally expanded and easy to maintenance.It is suitable for laboratory tests and can meet the requirements.This paper expounds on the composition,design and working principle of the instrument.

Engineering,Environmental Science
The Application of RS-485 in the UPS Monitor System and Its Repeat Circuit

汪飞,吴建德,何湘宁

DOI: https://doi.org/10.3969/j.issn.1001-4551.2002.05.013

2002-01-01

Abstract:In this paper, the standard of RS-485 bus and its applications in an UPS monitor system are introduced, and in the situation of overfull load nodes or overlong transmission distance, a repeat circuit of RS-485 is proposed.
Experiment On The Application Of Bluetooth In Vacuum Switch Cabinet

Zhaoxi Liu,Yulong Huang,Liangzhong Yao,Youjun Gong,Min Han,Rong Zeng,Zhiqiu Li

DOI: https://doi.org/10.1109/DRPT.2008.4523732

2008-01-01

Abstract:Under the trend of Substation Automation, the application of wireless technology to the data communication of power equipments has a wide prospect. Bluetooth is a mature and low-cost wireless technique which is widely applied for commercial use, however its application to power equipments such as vacuum switches which are now more and more used in medium voltage substations, still needs to develop. In this case, the research on the application of Bluetooth to monitor and control the vacuum switch cabinets is an attractive aspect. However, very few experiments have been carried out currently to assess the performance of Bluetooth communication under the harsh electromagnetic environment in vacuum switch cabinets, and carry on the reliability tests based on data communication demonstrator in practice. This paper designs and makes up a data communication demonstrator based on the Bluetooth Protocol with the chips of C805IF020 and ROK101008. The reliability tests on this demonstrator under a series of typical interferes in vacuum switch cabinets are carried out. These include reliability tests of 50Rz magnetic field, corona discharge, air gap breakdown and vacuum gap breakdown. Parallel experiments on the data communication demonstrators without EMI are also conducted for comparison. The features of the Bluetooth communication under typical interferes in vacuum switch cabinets are provided, and the results of the experiments are discussed in detail. They have shown that it is feasible to use the Bluetooth communication technology to monitor and control the vacuum switch cabinets.
An Improved Approach to RS485-Based Long-Distance High Speed Telemetry for Industrial Sensor Data

de gui wang,cheng li,tian huai ding

DOI: https://doi.org/10.4028/www.scientific.net/AMM.543-547.1013

2014-01-01

Applied Mechanics and Materials

Abstract:In industrial fields such as seismic explorations, RS485 is considered a workhorse interface standard, and it is the most widely used for serial interface found on sensors. However, long-distance transmission at high data throughput is one of the key features. An improved RS485-based high-speed remote transmission method is developed to implement the transmission of large amounts of data from distributed sensors. Based on the signal integrity analysis, the hardware interface designs including interface chips and impedance matching are determined by continuous square-wave pulse transmission. Then a self-defined protocol with the aid of FPGA hardware real-time processing is designed to make high-speed clock recovery and frame synchronizations. The 8b/10b encoded data streams are transmitted via a twisted-pair cable in the experiment. The experimental results indicate that the designed RS485 transceiver unit can drive the 220 meter twisted-pair lines at 20Mbps data speed with an error rate of 10-11.
PC-PLC Based Real-time Monitoring and Control System of Marine Gravity Meter

XU You-cheng,HAN Bo,LI Ping

DOI: https://doi.org/10.3969/j.issn.1000-3428.2011.05.083

2011-01-01

Abstract:GSS-2 type of marine gravity meter sensor has high measurement precision.After years of use,mechanical structure becomes steadier.With the rapid development of electronic information technology,the old measurement system becomes the major obstacle of high-precision measurement.This paper designs a hardware monitoring and control system using a stable Programmable Logic Controller(PLC) as core controller.Based on Modbus protocol,it develops a multi-functional monitoring and control software as the host computer.Experiments show that the hardware system performs steady and function of software is user-friendly.The system fully meets the design and use requirements.
Application of Mobus Protocol to Data Collection Instrument

曹祁,王晓萍,郭振武

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.06.014

2004-01-01

Abstract:This paper represents the application of data collection instrument, which is based on 89C51 microprocessor, including the design of RS485 interface circuit and the way to accomplish Modbus protocol.
Design and Implementation of the Instrument in Process Supervisory Level Based on Modbus Protocol

HE Guang-lin,ZHANG Guang-xin,BAO Jin-ming,ZHOU Ze-kui

DOI: https://doi.org/10.3969/j.issn.1000-3932.2007.04.018

2007-01-01

Abstract:According to Modbus industrial network,developed the instrument in process supervisory level.The instrument respectively achieved the data exchange between operator and PLC and between manager and operator by Modbus RTU protocol.Otherwise,it provided a standard current signal output to digital display instrument in the same level about a certain important parameter.In general,the instrument is universal and real-time to Modbus network,and it′s easy to operate,and has the friendly interface.
Design of Control System for Profile Gauge

Yi-bin HUANG,Yu-ai ZHANG

DOI: https://doi.org/10.7538/yzk.2013.47.09.1656

2013-01-01

Abstract:T he profile gauge can on-line get the cross section in the steel strip ,so it has been widely used in hot continuous rolling production-line . The structure of profile gauge and its distributed hardware structure based on PLC and software design of its control subsystem were introduced .The method of temperature and humidity measure-ment was analyzed .The time response of X-ray machine control based on RS232 com-munication was researched .It is proved that the control system meets the requirements of the profile gauge system .
A compound and portable vacuum gauge calibration apparatus

LU Yao-wen,CHEN Xu,LI De-tian,QI Jing,CHA Liang-zhen

DOI: https://doi.org/10.3969/j.issn.1002-0322.2013.03.001

IF: 4

2013-01-01

Vacuum

Abstract:A compound and portable vacuum calibration apparatus has been developed depending on the existing device.The wide calibration range of vacuum degree can be achieved by three methods integrated on one apparatus,which are static comparison method,static expansion method and dynamic throughput method.There is only one capacitance diaphragm gauge(CDG) with full range of 1.33×105Pa used as reference standard.The experimental results proved that the calibration range is 105Pa~10-5Pa,and the combined standard uncertainty is 1.3%~2.5%.Besides,the size of this apparatus is 450mm×400mm×750mm,and its total weight is less than 35kg.So the weight and cost of it are reduced compared with the existing device,and this apparatus is more suitable for on-site vacuum gauge calibration in many application fields.
Application of Fieldbus Technology to the Automatical Measurement Experiment Teaching

Ma Xiu

DOI: https://doi.org/10.3969/j.issn.1006-7167.2001.05.014

2001-01-01

Abstract:This paper introduced the application of fieldbus technology to the automatical measurement experiment teaching.
Application Of Serial Display Circuit In Intelligent Temperature Measurement And Control

J Wang,H Ai,Zx Li

2005-01-01

Abstract:This paper studies serial display structure, work principle of chip and format of the configuration register and display register The interface circuit and display control program of MC14489 in intelligent temperature measurement and control are given out. This paper also illustrates the decode manner of the display data. There are three kinds of decode manner that can be used for different display. Common display technique and method in intelligent instrument are expounded. This paper also describes the characteristics of parallel and serial interface display in the data transmission. The advantage and disadvantage of the static and dynamic display is summarized. The differences between hardware scan and software scan are illustrated. The application of static display chip is expounded. Display circuit of intelligent instrument that is made up of by serial interface can make the system have the small volume, few periphery circuit and low cost. The, ratio of performance and price is greatly enhanced. For the intelligent temperature measurement and control, compared with the design of parallel interface display used in the past, the serial interface display that is used now can save the CPU resource. The hardware is simple and has stable performance. The display circuit and software program involved in this paper have been already used in the actual system with high reliability.
Data sampling of refrigeration system and development of secondary treatment software

Zhang Xin,Liu Zhongbao,Ma Guoyuan,Yu Lihua

DOI: https://doi.org/10.3969/j.issn.1009-8402.2006.01.003

2006-01-01

Abstract:The process of utilizing Visual Basic to design and develop secondary treatment software for HP34970A data sampling instrument for refrigeration system is presented mainly.It concludes design of human-machine interface of the software,realizing of data acquisition,transferring of data-base,displaying of data sampling and problems needed more attention.Some source code of computer language is analyzed.Though the standard refrigeration system based on evaporator,condenser,throttle valve,compressor,its means and technique are references for the other refrigeration systems.
Design of communication interface of the insulation resistance meter for automatic verification system based on USB slave technology

Tang Xuwei,Teng Zhaosheng,Wang Yong,Tang Chenguang

DOI: https://doi.org/10.3969/j.issn.1674-7720.2011.15.020

2011-01-01

Abstract:At present,the existing of automation of insulation resistance meter testing system is in low degree,at the same time,data query and report generation are done by hand while instrument calibration can not meet the requirements of intelligent.This paper presents a table of automatic verification system of insulation resistance,comes up with a design to automatic verification system communication interface through the USB technology by the insulation resistance meter.The communication interface circuit of the insulation resistance meter for automatic verification system is designed based on CH375A and singlechip STC89C52RD+.And the communication software program is given.It a chieves a rapid and automated information exchange insulation resistance meter for the automatic verification system between PC and micro-printer.
Theoretical and experimental study of measuring gas temperature in vacuum environment using tunable diode laser absorption spectroscopy

Lan Li-Juan,Ding Yan-Jun,Jia Jun-Wei,Du Yan-Jun,Peng Zhi-Min

DOI: https://doi.org/10.7498/aps.63.083301

IF: 0.906

2014-01-01

Acta Physica Sinica

Abstract:Measuring the temperature in vacuum environment is more complex than in atmospheric environment. For example, high vacuum will cause the thermocouple sensor surface desorption, and the mechanism of heat transfer is also different. Therefore, there are some uncertainties if the thermocouple is used to measure the gas temperature in vacuum condition. In the present paper, tunable diode laser absorption spectroscopy (TDLAS) is employed to measure the gas temperature and also explore the application prospect of TDLAS temperature measurement technology in vacuum environment. During the thermal vacuum experiments, the vacuum gas cell is immersed in the thermostatic bath, and the gas temperature is determined by TDLAS. Meanwhile, a standard Pt-resistance is used to measure the thermostatic bath temperature. The results show that the temperatures of the gas and thermostatic bath are highly consistent with each other, and the difference between the two temperatures is less than +/- 0.2 degrees C when the thermostatic bath is stable.

Applications of RS-485 interface in the vacuum measurement

Design of Intelligent and Low-Power for Vortex Flow-Meter

Application of USB host in digital temperature-humidity recorder

Void Fraction Measurement Of Gas-Liquid Two-Phase Flow Based On (Cd)-D-4 Technique

Study of Teledata Acquisition System Based on LabView

Measurement and control system for gas-tight deep-sea water sampler based on LabVIEW

Design and Realization of Temperature Limiter Measurement and Control System

Design of Indoor Soil Temperature and Humidity Detection Instrument Based on RS-485 and RS-232

The Application of RS-485 in the UPS Monitor System and Its Repeat Circuit

Experiment On The Application Of Bluetooth In Vacuum Switch Cabinet

An Improved Approach to RS485-Based Long-Distance High Speed Telemetry for Industrial Sensor Data

PC-PLC Based Real-time Monitoring and Control System of Marine Gravity Meter

Application of Mobus Protocol to Data Collection Instrument

Design and Implementation of the Instrument in Process Supervisory Level Based on Modbus Protocol

Design of Control System for Profile Gauge

A compound and portable vacuum gauge calibration apparatus

Application of Fieldbus Technology to the Automatical Measurement Experiment Teaching

Application Of Serial Display Circuit In Intelligent Temperature Measurement And Control

Data sampling of refrigeration system and development of secondary treatment software

Design of communication interface of the insulation resistance meter for automatic verification system based on USB slave technology

Theoretical and experimental study of measuring gas temperature in vacuum environment using tunable diode laser absorption spectroscopy